Abstract:Geothermal energy can be effectively utilized for grain drying to reduce carbon emissions and also cut operational costs associated with conventional methods. The main challenges encountered in the use of the geothermal grain dryer, such as in Menengai, Kenya, include uneven grain drying and long throughput times. Grains near the hot air inlet dry at a faster rate compared to those near the exhaust end. Therefore, the grains must be recirculated within the dryer to achieve uniform moisture distribution. Grain recirculation is energy-intensive as it utilizes electricity running the elevator motors in addition to the suction pump. A Computational Fluid Dynamics (CFD) model was developed to study the airflow pattern and its impact on drying of maize. The model was simulated in ANSYS 21 and validated using experimental data. Finite volume discretization method was employed for meshing. Pressure-based segregated solver was used in the Computational Fluid Dynamics (CFD) simulation. Also, K-Omega turbulent model was used for enhancing wall treatment. The findings indicate that non-uniform hot air distribution across the grain buffer section causes uneven drying. Introducing filleted flow-guides results in a relatively uniform velocity, temperature, and turbulence kinetic energy distribution across the dryer. The average velocity and temperature magnitudes in lower compartments increased by 153.3% and 0.25% respectively for the improved dryer. In the upper compartments, the velocity and temperature increase were 176.5% and 0.22% respectively.

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Performance analysis of natural convection biomass operated grain dryer coupled with latent heat storage medium

Performance Simulation of a Modified Geothermal Grain Dryer Based at Menengai Well 3 in Kenya

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer

Control-oriented modeling of direct-heat co-current rotary dryers for energy demand flexibility

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Investigation of heat transfer in partially filled horizontal drums

Mathematical modelling of heat and mass transfer in agricultural grain drying

Modeling of Muti-layer Far-Infrared Dryer

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Heat and Mass Transfer in Unsaturated Porous Cake with Heated Walls

The mathematical modeling of changes in grain moisture and heat loss on adsorption drying from parameters of grain dryer

A Study for Estimating the Overall Heat Transfer Coefficient in a Pilot-Scale Indirect Rotary Dryer

Non-linear Heat and Mass Transfer During Convective Drying of Kaolin Cylinder Under Non-steady Conditions

Convective heat transfer analysis in aggregates rotary drum reactor

Development of an empirical correlation to predict the effectiveness of heat and mass transfer from textiles in a rotating drum

An efficient correlation for heat and mass transfer effectiveness in tumble-type clothes dryer drums

Effect of heat and mass transfer coefficients on force convective drying of porous media