Abstract:A reactive computational fluid dynamic-discrete element model (CFD-DEM) is coupled with a one-dimensional thermally thick model to simulate biomass pyrolysis in a three-dimensional rotary drum reactor. Furthermore, a diffusion-based voidage algorithm and a competitive pyrolysis scheme are also implemented. After validation, the integrated model is applied to explore the effects of the drum rotating speed and the filling level. The particle distribution and motion, heat transfer, and conversion behavior are selected as indicators. Results show that the particle inventory within the central transverse section is affected by both the mechanic effect of rotation and the axial conveying due to the product gas flux. The angle of repose for the central section first increases and then decreases with rotating speed, while increasing the filling level reduces the angle of repose and delays the bed sinking. Moreover, the particles at the bed surface are energetic and thus the area of high-value granular temperature is distributed along the bed surface. The particle accumulated displacement increases and the particle residence time at the wall reduces with the rotating speed and the filling level. In addition, the specific heat conduction rate can be promoted by decreasing the rotating speed and the filling level. A higher rotating speed or a lower filling level is favorable for particle mixing and thus makes particles heat up uniformly. Finally, a higher rotating speed or filling level exerts a negative impact on biomass conversion. These findings are helpful for better understanding biomass pyrolysis in a rotary drum reactor.

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

SIMULATION MODELS OF MULTI-CYLINDER PAPER DRYING

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

A Simulation Study of Heat and Mass Transfer in A Honeycombed Rotary Desiccant Dehumidifier

CFD-DEM Study of heat and mass transfer of ellipsoidal particles in fluidized bed dryers

Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Modeling of Muti-layer Far-Infrared Dryer

Non-linear Heat and Mass Transfer During Convective Drying of Kaolin Cylinder Under Non-steady Conditions

Heat-transfer simulation of slice potato during drying.

Convective drying of a moist porous object under the effects of a rotating cylinder in a channel

Effect of heat and mass transfer coefficients on force convective drying of porous media

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

Batch grain drier design and performance prediction

Numerical Simulation and Analysis of Effect of Injection Volume on Biomass Particle Cyclone Venturi Dryer