Abstract:The moisture content of freshly picked walnuts is very high. In order to facilitate storage and transportation, it needs to be dried to prevent mildew. In this study, the pre-drying simulation and experimental study were carried out on the walnut drying equipment made by the research group to determine the optimal drying parameters. The effects of different inlet temperatures (353K, 373K, 393K), drying wind speeds (1.1 m/s, 1.4 m/s, 1.7 m/s) and drying time (30min, 45min, 60min) on the temperature and velocity fields of fluid and walnuts in the drying device were investigated by using the orthogonal test method of three factors and three levels. FLUENT software was used to simulate the drying process of open walnuts under hot air heating, and the distribution of fluid temperature field and velocity field in the drying device and the temperature change law of walnuts were obtained. The results show that when the inlet temperature is 393K, the inlet velocity is 1.7 m/s, and the drying time is 45min, the temperature field distribution of fluid and walnut in the drying device is the best and the change is the most uniform. In addition, the temperature change of the simulation results is consistent with the test results through experiments, which verifies the reliability of the simulation results. In order to more accurately simulate the change law of temperature and humidity transfer in hot air drying of walnuts, the walnut was modeled as a sphere consisting of three layers: walnut shell, air gap and walnut kernel. The reliability of the parameters was verified by surface response analysis. Taking inlet temperature, velocity and drying time as influencing factors and temperature change rate as evaluation index, the determination coefficient of regression model was R2 = 0.9966, and the correction determination coefficient Adj. R2 = 0.9922, indicating three influences. This study provides a theoretical basis for determining the optimum operating parameters of open walnut pre-drying, and has application value for walnut food processing.

Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

Discrete Heaped Model of Tobacco Strips Drying and Characteristics Analysis of Heat and Mass Transfer

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Validation and Optimization of Heat and Mass Transfer Model for Mushroom Convection Drying

Modeling of Muti-layer Far-Infrared Dryer

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

An adaptive optimization method toward batch-wise variable set point of outlet moisture content for the tobacco drying process

Study on heat and mass transfer characteristics in drying process of drum dryer based on the DEM-CFD coupled method

A Heat and Mass Transfer Model of Peanut Convective Drying Based on a Two-Component Structure

Optimization Method for the Evaluation of Convective Heat and Mass Transfer Effective Coefficients and Energy Sources in Drying Processes

Modeling moisture and heat transfer during superheated steam wood drying considering potential evaporation interface migration

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer

The simulation analysis and experiment of drying thin-layer radish strips

Predicting Tobacco Pyrolysis Based on Chemical Constituents and Heating Conditions Using Machine Learning Approaches

Two-Layered Model Predictive Control Strategy of the Cut Tobacco Drying Process

Temperature Field Simulation and Energy Analysis of a Heat Pump Tobacco Bulk Curing Barn

SIMULATION MODELS OF MULTI-CYLINDER PAPER DRYING

Effect of heat and mass transfer coefficients on force convective drying of porous media

Heat-fluid-solid coupling heat transfer analysis and parameter optimization in walnut drying device based on finite element method