Abstract:A new optimization method for the assessment of the coefficients existing in a model of drying kinetics is developed and presented in this article. This method consists of matching the drying kinetics resulting from the mathematical model with the drying kinetics resulting from the experiments. Both the heat and mass transfer coefficients, the critical relative humidity, and the additional ultrasound energy (heat) source are included in the optimization procedure. The Adams–Bashforth multistep method of solving nonlinear ordinary differential equations is used. The inverse problem of model parameter estimation is solved by the Rosenbrock optimization method. The methodology is illustrated by the example of the ultrasound-assisted convective drying of apple and carrot. A high level of agreement between the results obtained experimentally and numerically was found. The obtained results confirmed the great influence of ultrasound on the drying kinetics. It was found that ultrasound application improved the mass transfer by 20–80% and heat transfer by 30–90%. It was also found that the heating effect caused by the ultrasound’s absorption was very small, with a value below 1%.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop and present a new optimization method for evaluating the effective coefficients of heat and mass transfer and the energy source during the drying process. Specifically, this method aims to determine the following parameters by matching the drying kinetics predicted by the mathematical model with the experimental results: 1. **Heat transfer coefficient \( h_T \) and mass transfer coefficient \( h_m \)**: These coefficients describe the efficiency of heat and mass transfer during the drying process. 2. **Critical relative humidity \( \phi_{cr} \)**: This parameter determines the point at which the drying process transitions from the constant drying rate period (CDRP) to the falling - drying rate period (FDRP). 3. **Extra heat \( \Delta Q \) caused by ultrasonic absorption**: This part of the energy source is generated due to the absorption of ultrasonic waves in the material. ### Research Background Biomaterials (such as fruits and vegetables) are very sensitive to high - temperature and long - time treatment, so mild drying methods are required. Traditional convective drying usually leads to the degradation of these materials. To improve this situation, in recent years, a hybrid drying method combining convective drying and ultrasonic assistance has been developed. This method can not only significantly reduce energy consumption and shorten the drying time, but also improve the quality of food, retain its nutritional value (such as protein, carbohydrate, vitamin and mineral) and appearance characteristics (such as color and shape). ### Optimization Method The author proposes an optimization method based on inverse problem solving, using the Rosenbrock optimization algorithm to estimate the model parameters. The specific steps are as follows: - **Mathematical model**: A coupled set of heat and mass transfer equations is established, which describes the change of moisture content and temperature with time during the drying process. \[ m_s \frac{dX}{dt} = -A_m h_m \ln\left(\frac{\phi|_{\partial B} p_{vs}(T)}{\phi_a p_{vs}(T_a)}\right) \] \[ m_s \frac{d}{dt}\left[(c_s + c_l X) T\right] = A_T h_T (T_a - T) - A_m h_m l \ln\left(\frac{\phi|_{\partial B} p_{vs}(T)}{\phi_a p_{vs}(T_a)}\right) + \Delta Q \] - **Numerical solution**: The Adams - Bashforth multi - step method is used to solve the nonlinear ordinary differential equations to ensure the stability of long - time simulation. - **Parameter estimation**: By minimizing the difference between the experimental data and the numerical simulation results (in the form of an objective function), the Rosenbrock optimization method is used to estimate the model parameters. ### Experimental Verification This method has been verified by ultrasonic - assisted convective drying experiments of apples and carrots. The experimental results show that the application of ultrasonic waves significantly improves the mass transfer efficiency (20 - 80%) and heat transfer efficiency (30 - 90%), but the heating effect caused by ultrasonic absorption is very small, less than 1%. ### Conclusion This study has successfully developed a new optimization method, which can accurately evaluate the heat and mass transfer coefficients in the drying process and the influence of the ultrasonic energy source. This provides theoretical basis and technical support for improving the drying process.

Optimization Method for the Evaluation of Convective Heat and Mass Transfer Effective Coefficients and Energy Sources in Drying Processes

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Effect of heat and mass transfer coefficients on force convective drying of porous media

Validation and Optimization of Heat and Mass Transfer Model for Mushroom Convection Drying

A fully coupled multiphase model for infrared-convective drying of sweet potato

Iterative method for fast estimation of convective drying characteristics of biomass

Effect of Thermophysical Properties on Coupled Heat and Mass Transfer in Porous Material during Forced Convective Drying

Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Heat-fluid-solid coupling heat transfer analysis and parameter optimization in walnut drying device based on finite element method

Non-linear Heat and Mass Transfer During Convective Drying of Kaolin Cylinder Under Non-steady Conditions

A Heat and Mass Transfer Model of Peanut Convective Drying Based on a Two-Component Structure

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Response Surface Methodology as a Tool for Optimization of Pulsed Electric Field Pretreatment and Microwave-Convective Drying of Apple

Heat and Mass Transfer Simulation of Intensification Drying Technologies: Current Status and Future Trends

Mathematical Model and Numerical Simulation of Biological Porous Medium During Hot Air Drying

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

RESEARCH OF HEAT AND MASS TRANSFER DURING CONVECTIVE DRYING OF COLLOID CAPILLARY-POROUS MATERIALS

Experimental and computer study of the mechanism and identification of conditions for energy-efficient removal of moisture from materials under ultrasonic exposure

Analysis of exergetic performance for a combined ultrasonic power/convective hot air dryer

Effect of drying kinetics model on energy efficiency of drying systems

Parameter optimization of multistage closed series heat pump drying system