Abstract:In chemical and pharmaceutical industries, rotating drums are commonly used as mixers, dryers, granulators, and reactors for processing particulate materials (Rutgers, 1965). Most of the earlier studies are limited to the spherical particles and have focused on understanding granular flow in drums operating under a rolling regime. However, there are numerous industrial operations in which non-spherical particles are heated in a rotating drum operating in the cascading regime. In the present work, we attempt to understand the heat transfer process between hot air and non-spherical particles in a rotating drum. Non-spherical particles, considered for the simulations, mimic pharmaceutical tablets having standard round convex (SRC) and oblong shapes. The multi-sphere approach is used to model the tablet shapes. Collisions between the tablets are captured through the interaction between candidate spheres of non-spherical particles. The focus here is to study the heat transfer between hot air and particles and the heat conduction between the particles. The effects of drum speed, particle shape, and air inlet temperature on the bed temperature distribution are investigated. Analysis of average bed temperature profiles shows that the bed temperature remains constant regardless of the drum speed but is influenced by the temperature of the incoming air. The logarithmic mean temperature is not impacted by the incoming air temperature but is influenced by particle shape. The logarithmic mean curve shows a steeper slope for SRC particles due to higher surface area-to-volume ratio and better radial mixing compared to Oblong particles

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Heat transfer studies in a rotating drum containing non-spherical particles

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Experimental study of the contact heat transfer coefficient between the covered wall and solid bed in rotary drums

Heat transfer in indirect heated rotary drums filled with monodisperse spheres: Comparison of experiments with DEM simulations

Some aspects of heat transfer in rolling mode rotating drums operated at low to medium temperatures

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

DEM investigation of heat transfer in a drum mixer with lifters

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

DEM analysis of flow dynamics of cohesive particles in a rotating drum

Transverse mixing and heat transfer in horizontal rotary drum reactors

Convective heat transfer analysis in aggregates rotary drum reactor

Wall to particle bed contact conduction heat transfer in a rotary drum using DEM

DEM simulation of heat transfer of binary-sized particles in a horizontal rotating drum

Investigation of heat transfer in partially filled horizontal drums

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Experimental and numerical study of conductive heat transfer in aggregate particles using a flighted, rotary drum

Experimental investigation of conduction heat transfer in a rotary drum using infrared thermography

DEM Simulation of Heat Transfer in Granular Materials