Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Transverse mixing and heat transfer in horizontal rotary drum reactors

Residence time distribution in a new horizontal self-cleaning reactor with viscous media

Experimental study of the contact heat transfer coefficient between the covered wall and solid bed in rotary drums

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Heat transfer studies in a rotating drum containing non-spherical particles

Heat transfer in indirect heated rotary drums filled with monodisperse spheres: Comparison of experiments with DEM simulations

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Investigation of heat transfer in partially filled horizontal drums

DEM simulation of heat transfer of binary-sized particles in a horizontal rotating drum

Some aspects of heat transfer in rolling mode rotating drums operated at low to medium temperatures

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

Heat and water transfer in a rotating drum containing solid substrate particles

Measuration of Gas-Liquid Interfacial Area in Rotating Drum Reactor by Chemical Method

DEM investigation of heat transfer in a drum mixer with lifters

Investigating the Flow of Rod-Like Particles in a Horizontal Rotating Drum Using DEM Simulation

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Modelling of particle mixing and segregation in the transverse plane of a rotary kiln

Convective heat transfer analysis in aggregates rotary drum reactor