Abstract:Compaction is a critical step in asphalt pavement construction. The objective of this study is to analyze the mesoscale mechanical behaviors of coarse aggregates in asphalt mixtures during gyratory compaction through experiments and numerical simulation using the Discrete Element Method (DEM). A novel granular sensor (SmartRock) was embedded in an asphalt mixture specimen to collect compaction response data, including acceleration, stress, rotation angle and temperature. Moreover, the irregularly shaped coarse aggregates were regenerated in the DEM model, and numerical simulations were conducted to analyze the evolution of aggregate interaction characteristics. The findings are as follows: (1) the measured contact stress between particles changes periodically during gyratory compaction, and the amplitude of stress tends to be stable with the increase of compaction cycles; (2) the contact stress of particles is influenced by the shape of aggregates: flat-shaped particles are subjected to greater stress than angular, fractured or elongated particles; (3) the proportion of strong contacts among particles is high in the initial gyratory compaction stage, then decreases as the number of gyratory compactions grows, the contacts among particles tending to homogenize; (4) during initial gyratory compactions, the normal contact forces form a vertical distribution due to the aggregates’ gravity accumulation. The isotropic distribution of contact forces increases locally in the loading direction along the axis with a calibrated internal angle orientation (1.25°) in the earlier cyclic loading stage, then the local strong contacts decrease in the later stage, while the strength of the force chains in other directions increase. The anisotropy of aggregate contact force networks tends to weaken. In other words, kneading and shearing action during gyratory compaction have a positive impact on the homogenization and isotropy of asphalt mixture contact forces.

Experimental and numerical study of conductive heat transfer in aggregate particles using a flighted, rotary drum

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Convective heat transfer analysis in aggregates rotary drum reactor

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

Three-Dimensional Discrete-Element Modeling of Aggregate Homogeneity Influence on Indirect Tensile Strength of Asphalt Mixtures

Use of Thermodynamics and Heat Transfer Principles to Predict Virgin Aggregate Temperature in a Hot-Mix Asphalt Drum Plant

Optimizing the trajectory of aggregates in drying units from the asphalt plants

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

Experimental and numerical simulation study on flow behavior of asphalt mixture using smart aggregate

Research on Heat Transfer Model of Asphalt Pavements Subjected to Microwave Heating Recycling

Numerical Study of Particle Behaviours and Heat Transfer in a Complex Rotary Kiln

A Study on the Microscopic Properties of the Oil–Stone Interfacial Phase of a Reclaimed Asphalt Mixture Based on Molecular Dynamics Simulation

DEM investigation of heat transfer in a drum mixer with lifters

Evaluation of Microwave Heating for Potential Applications in Hot In-Place Recycling of Asphalt Pavement

Experimental and numerical investigation of using waste glass aggregates in asphalt pavement to mitigate urban heat islands

Toward the Design of an Induction Heating System for Asphalt Pavements with the Finite Element Method

Experimental and Numerical Analysis on Mesoscale Mechanical Behavior of Coarse Aggregates in the Asphalt Mixture during Gyratory Compaction

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Investigation on the temperature distribution characteristics of steel slag asphalt mixture under different microwave heating and cooling methods

Thermal contraction coordination behavior between unbound aggregate layer and asphalt mixture overlay based on the finite difference and discrete element coupling method

Induction Heating Optimization for Efficient Self-Healing in Asphalt Concrete