Pablo Donoso-García,Luis Henríquez-Vargas,Juan González,Isaac Díaz,Ismael Fuentes
Abstract:An experimental study and dimensional analysis of the effective heat transfer coefficient in a continuous-indirect rotatube dryer using forest biomass as the granular material isare developed in the present work. The study employed a factorial design 33 to investigate the effects of feed flow frequency (20–35–50 (Hz)), drum rotational velocity (6–8–10 (rpm)), and saturated vapor pressure (4–5–6 (bar)) on the heat transfer coefficient. During steady state conditions, the moisture content profiles and inlet and outlet temperatures were measured within the experimental region, and parameters, such as the effective heat transfer coefficient, solid retention change, and moisture content ratio were studied. The results showed that heat transfer was optimized with high solid feeding rates, low pressure, and low rotation, with solid feeding being the predominant factor. The moisture content profiles revealed a change in the hydrodynamic behavior, with the center point of the experimental region being the least optimal. The dimensional analysis yielded a Nu number as a function of Pe, Fr, and the feeding dimensionless number. A new dimensionless energy efficiency number improved the coefficient correlation from 85.88 (%) to 94.46 (%), indicating the developed model potential to predict dimensionless variables and scale continuous-indirect rotatube dryers.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to evaluate and estimate the overall heat transfer coefficient when using sawdust as a substrate in a pilot - scale indirect rotary dryer. Specifically, the research aims to develop a mathematical correlation through theoretical and experimental methods to determine the effective heat transfer coefficient based on dimensionless numbers related to solid flow and heat transfer potential. In addition, the research also hopes to provide insights into the optimal operating conditions for drying sawdust using this indirect drying technique, which is crucial for the production of carbon - neutral solid biofuels.
### Research Background
Biomass, as a renewable energy resource, has attracted attention because it reduces dependence on fossil fuels and helps to reduce greenhouse gas emissions. In order to ensure the quality of biomass during the combustion process, its moisture content must be managed, and the recommended moisture content is no more than 10%. Selecting an appropriate drying technique is crucial for obtaining dry raw materials suitable for conversion into biofuels (such as pellets) and for meeting the carbon - neutral challenge.
### Research Methods
The research adopted a 3³ factorial design to study the effects of feed flow frequency (20 - 35 - 50 Hz), drum rotation speed (6 - 8 - 10 rpm), and saturated steam pressure (4 - 5 - 6 bar) on the heat transfer coefficient. Under steady - state conditions, the moisture content curves of the materials, the inlet and outlet temperatures were measured, and parameters such as the effective heat transfer coefficient, solid retention change, and moisture content ratio were studied.
### Main Findings
- **Heat Transfer Optimization**: The research results show that the heat transfer is optimal under high solid feed rate, low pressure, and low rotation speed, among which the solid feed is the main influencing factor.
- **Moisture Content Curve Change**: The moisture content curve reveals the change in hydrodynamic behavior, and the center point of the experimental area is the least desirable.
- **Dimensionless Analysis**: Through dimensionless analysis, the Nusselt number (Nu) was obtained as a function of the Péclet number (Pe), the Froude number (Fr), and the feed dimensionless number. A new dimensionless energy efficiency number was introduced, which increased the correlation coefficient from 85.88% to 94.46%, indicating the potential of the developed model in predicting dimensionless variables and expanding continuous indirect rotary dryers.
### Mathematical Model
The mathematical model used in the research considered the coupled heat transfer mechanisms in the rotary dryer, including conduction, convection, and radiation. According to Newton's law of cooling, the heat transfer from the tube wall to the wet solid can be expressed as:
\[ Q = h_{\text{eff}} A_T (T_W - T_{\text{sat}}) \]
where:
- \( Q \) is the heat transfer amount
- \( h_{\text{eff}} \) is the effective heat transfer coefficient
- \( A_T \) is the total heat exchange area
- \( T_W \) is the heating tube temperature
- \( T_{\text{sat}} \) is the saturation temperature of water
Through statistical analysis of the experimental data, the regression equation of the effective heat transfer coefficient was obtained:
\[ h_{\text{eff}} = 18.3759 + 9.8811B - 2.7917C - 1.4756A + 1.6289AA \]
where \( A \), \( B \), and \( C \) represent the coded values of the drum rotation speed, feed flow rate, and steam pressure respectively.
### Conclusion
Through experimental and theoretical analysis, this research successfully evaluated the effective heat transfer coefficient of sawdust in a pilot - scale indirect rotary dryer and proposed a correlation based on dimensionless numbers. These findings provide valuable references for optimizing drying operating conditions, especially having important significance in the production of carbon - neutral solid biofuels.