Abstract:The complicated composition structure of the asphalt mixture makes it difficult to determine its multi-scale performance. It is impossible to understand the internal interaction mechanism of asphalt mixture only through laboratory tests, especially under complex conditions at the microscale, which can be effectively solved by the discrete element method (DEM). This paper summarized the progress and advances in DEM modeling of asphalt mixture mainly consisting of the principle of DEM, DEM simulation for asphalt mixture, asphalt mixture compaction and mechanical behavior based on the DEM. The basis of DEM modeling is the well-known Newton's second law, through which the discrete elements are determined primarily according to the motion equation and force–displacement law. The DEM modeling of asphalt mixture often includes the simulation of coarse aggregates, asphalt mortar and air voids regardless of two-dimensional (2D) and three-dimensional (3D) DEM. The morphological characteristics of coarse aggregates and spatial distribution of air voids are essential to the simulation results of asphalt mixtures. In addition, the commonly used DEM contact models in asphalt mixture, including the linear model , Burgers model and linear parallel bond model , are introduced and analyzed. The main micro-parameters of various contact models are usually obtained through laboratory test results by trial and error. And the selection of contact modeling and determination of macro-parameters are discussed. Then, asphalt mixture compaction based on DEM, mainly containing Superpave gyratory compaction (SGC) and Marshall impact compaction (MIC), is estimated in this paper. It is concluded that displacement, rotation and contact stress of aggregate particles can be accurately captured similar to SmartRock. Moreover, varying mechanical behavior and the significant influencing factors based on DEM are evaluated comprehensively. Finally, further prospects in DEM modeling of asphalt mixture are proposed to promote the development and application of numerical simulation in pavement engineering.

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

Comparative Study of 2D and 3D Micromechanical Discrete Element Modeling of Indirect Tensile Tests for Asphalt Mixtures

Analysis on Mechanical Response of Asphalt Pavement Structure Based on 3 D Viscoelastic Finite Element Method

Investigation of Micro-mechanical Response of Asphalt Mixtures by a Three-dimensional Discrete Element Model

Mechanical Response Analysis of Transverse Crack Treatment of Asphalt Pavement Based on DEM

Advances in Discrete Element Modeling of Asphalt Mixture: A Literature Review

Micromechanical and microstructure analysis of asphalt concrete under triaxial load condition based on Discrete Element Method

Discrete-Element Modeling of Mean Texture Depth and Wearing Behavior of Asphalt Mixture

Comparison Of Mechanical Responses Of Asphalt Mixtures Under Uniform And Non-Uniform Loads Using Microscale Finite Element Simulation

Application of Semi-Analytical Finite Element Method to Analyze Asphalt Pavement Response under Heavy Traffic Loads

Numerical Simulation of Mechanical Response Analysis of Asphalt Pavement under Dynamic Loads with Non-Uniform Tire-Pavement Contact Stresses

Evaluation of Fatigue Behavior of Asphalt Field Cores Using Discrete Element Modeling

Numerical Simulation of an Indirect Tensile Test for Asphalt Mixtures Using Discrete Element Method Software

Dynamic response of multi-scale structure in flexible pavement to moving load