Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Steady State Response of Infinite Plate on Visco-elastic Foundation Subjected to Moving Load

Dynamic response of rigid pavements to moving vehicles

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Dynamic viscoelastic response of an instrumented asphalt pavement under various axles with non-uniform stress distribution

Visco-elastoplastic response of flexible pavement under traffic loads

Viscoelastic Mechanical Responses of HMAP under Moving Load.

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Dynamic Response of Pavement Subjected to Moving Traffic Load

Dynamic responses of a saturated poroelastic half-space generated by a moving truck on the uneven pavement