Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Modeling Stress-Dependent Anisotropic Elastoplastic Unbound Granular Base in Flexible Pavements

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Development of an Artificial Neural Network-Based K-Value Prediction Model to Improve the Sensitivity of Base Layer on Rigid Pavement Performance

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Use of an Artificial Neural Network Approach for the Prediction of Resilient Modulus for Unbound Granular Material

An Inverse Approach to Determine Complex Modulus Gradient of Field-Aged Asphalt Mixtures

Kinetics-based Aging Prediction of Asphalt Mixtures Using Field Deflection Data

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Parametric Study of Modified Subgrade Reaction Model Using Artificial Neural Network Approach

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation

Estimation of Resilient Modulus of Unbound Aggregates Using Performance-Related Base Course Properties

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Improved Sensitivity of Base Layer on the Performance of Rigid Pavement

Comparative Analysis of Using Laboratory Testing and Nondestructive Testing to Obtain Subgrade Resilient Moduli

Predicting Dynamic Modulus of Asphalt Mixture Using Data Obtained from Indirect Tension Mode of Testing

Sensor-Based Structural Health Monitoring of Asphalt Pavements with Semi-Rigid Bases Combining Accelerated Pavement Testing and a Falling Weight Deflectometer Test