Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Equivalent Vehicle Dynamic Load Coefficient on Rough Pavement

Dynamic response of rigid pavements to moving vehicles

Steady State Response of Infinite Plate on Visco-elastic Foundation Subjected to Moving Load

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

Determination of Flexible Pavement Deterioration Conditions Using Long‐Term Pavement Performance Database and Artificial Intelligence‐based Finite Element Model Updating

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Evaluation of Flexible Pavement Deterioration Conditions Using Deflection Profiles under Moving Loads

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Dynamic Response of Pavement Subjected to Moving Traffic Load

Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

Dynamic Response of Pavements on Poroelastic Half-Space Soil Medium to a Moving Traffic Load

Iterative Method for Predicting Uneven Bridge Approach Settlement (BAS) Caused by Vehicle Loads

Elasto-viscoplastic FEA of Reinforced Pavements under Traffic Loading

A Double-Layered Model for Highway Subgrade and Its Dynamic Response Due to Traffic Loads

Application of Dynamic Analysis in Semi-Analytical Finite Element Method