Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

Evaluation of Flexible Pavement Deterioration Conditions Using Deflection Profiles under Moving Loads

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Determination of Flexible Pavement Deterioration Conditions Using Long‐Term Pavement Performance Database and Artificial Intelligence‐based Finite Element Model Updating

Development of a New Faulting Model in Jointed Concrete Pavement Using LTPP Data

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Kinetics-based Aging Prediction of Asphalt Mixtures Using Field Deflection Data

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

Automatic Inverse Analysis of Asphalt Pavement Field Aging Based on System Identification

Energy-based Crack Initiation Model for Load-Related Top-Down Cracking in Asphalt Pavement

Review of Mechanistic-Empirical Modeling of Top-Down Cracking in Asphalt Pavements

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Enhanced Model for Thermally Induced Transverse Cracking of Asphalt Pavements

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

A Calibrated Mechanics-Based Model for Top-Down Cracking of Asphalt Pavements

Non‐destructive evaluation of longitudinal cracking in semi‐rigid asphalt pavements using FWD deflection data

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

A probabilistic approach to detect structural problems in flexible pavement sections at network level assessment

Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM

Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

Incorporating truck speed effect on evaluation and design of flexible pavement systems