Abstract:Due to its good mechanical properties and high ionic conductivity, the sulfide-type solid electrolyte (SE) can potentially realize all-solid-state batteries (ASSBs). Nevertheless, challenges, including limited electrochemical stability, insufficient solid–solid contact with the electrode, and reactivity with lithium, must be addressed. These challenges contribute to dendrite growth and electrolyte reduction. Herein, a straightforward and solvent-free method was devised to generate a robust artificial interphase between lithium metal and a SE. It is achieved through the incorporation of a composite electrolyte composed of Li6PS5Cl (LPSC), polyethylene glycol (PEG), and lithium bis(fluorosulfonyl)imide (LiFSI), resulting in the in situ creation of a LiF-rich interfacial layer. This interphase effectively mitigates electrolyte reduction and promotes lithium-ion diffusion. Interestingly, including PEG as an additive increases mechanical strength by enhancing adhesion between sulfide particles and improves the physical contact between the LPSC SE and the lithium anode by enhancing the ductility of the LPSC SE. Moreover, it acts as a protective barrier, preventing direct contact between the SE and the Li anode, thereby inhibiting electrolyte decomposition and reducing the electronic conductivity of the composite SE, thus mitigating the dendrite growth. The Li|Li symmetric cells demonstrated remarkable cycling stability, maintaining consistent performance for over 3000 h at a current density of 0.1 mA cm–2, and the critical current density of the composite solid electrolyte (CSE) reaches 4.75 mA cm–2. Moreover, the all-solid-state lithium metal battery (ASSLMB) cell with the CSEs exhibits remarkable cycling stability and rate performance. This study highlights the synergistic combination of the in-situ-generated artificial SE interphase layer and CSEs, enabling high-performance ASSLMBs.

A Dual‐Phase Electrolyte for High‐Energy Lithium–Sulfur Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A novel mixed ether-based electrolyte for lithium–sulfur batteries with Li anode protection by dual salts

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Stable Solvent-Derived Sulfur-Rich Inorganic Solid Electrolyte Interphase Via Solvation Modulation for Lithium Metal Batteries

Designing Cation–Solvent Fully Coordinated Electrolyte for High‐Energy‐Density Lithium–Sulfur Full Cell Based on Solid–Solid Conversion

Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium-Sulfur Batteries.

A new ether-based medium-concentrated electrolyte for lithium–sulfur battery with lean Li anode

High-Performance Dual-Salt Electrolyte Based on Tetrahydrofuran and Dipropyl Ether for Lithium-Sulfur Battery

Electrolytes with Controlled Polysulfide Insolvability for Lithium-Sulfur Batteries

An encapsulating lithium-polysulfide electrolyte for practical lithium–sulfur batteries

The Radical Pathway Based on a Lithium-Metal-Compatible High-Dielectric Electrolyte for Lithium-Sulfur Batteries

Linear ether-based highly concentrated electrolytes for Li-sulfur batteries

A High Performance Lithium-Ion Sulfur Battery Based on a Li2S Cathode Using a Dual-Phase Electrolyte

Stabilizing Li4SnS4 Electrolyte from Interface to Bulk Phase with a Gradient Lithium Iodide/Polymer Layer in Lithium Metal Batteries

A three‐way electrolyte with ternary solvents for high‐energy‐density and long‐cycling lithium–sulfur pouch cells

Highly Solvating Electrolytes with Core‐Shell Solvation Structure for Lean‐Electrolyte Lithium‐Sulfur Batteries

Shielding Polysulfide Intermediates by an Organosulfur‐Containing Solid Electrolyte Interphase on the Lithium Anode in Lithium–Sulfur Batteries

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

Dual‐Ion Flux Management for Stable High Areal Capacity Lithium–Sulfur Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries