Abstract:Sulfide -Based Solid Electrolytes for Solid State Batteries Chengdu Liang , Yongsheng Guo, Chengyong Liu Research Institute, Ningde Contemporary Amperex Technology Limited， Fujian Province 352100, China The energy density of lithium ion batteries is now approaching the theoretical limit. Therefore, the development of next-generation batteries is of great technical interest nowadays. Solid state lithium batteries have attracted considerable attention because the replacement of an organic liquid electrolyte with a safer and more reliable inorganic solid electrolyte simplifies the battery design and improves safety and durability of the battery [1]. A crucial material to develop solid state batteries is a solid electrolyte with high Li+ ion conductivity at room temperature. Among different kinds of solid electrolytes, inorganic sulfide-based solid electrolytes are one of the most promising candidates for solid state lithium batteries due to the high ionic conductivity, wide electrochemical window and ease of forming framework structures [2-3]. However, there are still many challenges for the commercialization of solid state lithium batteries with sulfide-based electrolyte [4-5], for instance, the electrolyte/electrodes interface and air stability of sulfide-based electrolytes need to be further improved, and advanced manufacturing technologies are required as well. In this presentation, several strategies to enhance ionic conductivity of sulfide-based solid electrolytes are deliberated; an ionic conductivity as high as 3.0 mS/cm has been achieved. We will then summarize the research progresses of solid state lithium batteries with sulfide-based electrolytes based on our work. Future research trends and perspectives for facilitating further improvement on the performance of sulfide-based solid state batteries will also be discussed. Reference [1] CW Sun, Nano Energy 33 (2017) 363. [2] ZC Liu, CD Liang, J. Am. Chem. Soc., 135(3) (2013) 975. [3] D. Liu, Materials Science and Engineering B 213(2016)169. [4] A. Sakuda, Solid State Ionics 285 (2016) 112. [5] J. C. Bachman, Chem. Rev. 2016, 116, 140. *Corresponding author. Email: LiangCD@Catlbattery.com.

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

Enhancing Ionic Conductivity and Electrochemical Stability of Li3PS4 Via Zn, F Co-Doping for All-Solid-State Li-S Batteries

Realizing high-capacity all-solid-state lithium-sulfur batteries using a low-density inorganic solid-state electrolyte

Binary anion and cation co-doping enhance sulfide solid electrolyte performance for all-solid-state lithium batteries

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

Synergistic Interfacial Optimization for High-Sulfur-Content All-Solid-State Lithium-Sulfur Batteries

Tailoring the Interface between Sulfur and Sulfide Solid Electrolyte for High-Areal-Capacity All-Solid-State Lithium–Sulfur Batteries

Regulating p‐Band Center of Sulfur in Li‐Argyrodite to Stabilize Dual Solid–Solid Interface for Robust All‐Solid‐State Lithium–Sulfur Battery

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

High performance P-based argyrodite sulfide electrolytes enabled by Sb-based argyrodite doping for all-solid-state lithium metal batteries

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes

A Versatile Li<sub>6.5</sub>In<sub>0.25</sub>P<sub>0.75</sub>S<sub>5</sub>I Sulfide Electrolyte Triggered by Ultimate-Energy Mechanical Alloying for All-Solid-State Lithium Metal Batteries

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

A Versatile Li 6.5 In 0.25 P 0.75 S 5 I Sulfide Electrolyte Triggered by Ultimate‐Energy Mechanical Alloying for All‐Solid‐State Lithium Metal Batteries