Abstract:Compared to the conventional lithium-sulfur (Li-S) batteries using liquid electrolytes, all-solid-state lithium-sulfur batteries (ASSLSBs) own the merits of eliminating polysulfide shuttle effects, potentially higher energy density, and superior safety. However, there are challenges of low utilization of sulfur caused by poor ion and electron conductions in the cathode, huge interfacial resistance due to the contact loss caused by huge volume change of sulfur during cycling, and sluggish reaction kinetics and higher thermodynamic barriers because of the one-step reaction from S 8 to Li 2 S reactions. Also, the carbon additive could accelerate the decomposition of sulfide solid-state electrolyte (SSE) resulting newborn impedance. Therefore, it is significant to interface engineering the carbon additive through surface modification and functionalization to improve the electrochemical stability, charge transfer, and reaction kinetics in ASSLSBs. Herein, for the first time, we designed a highly conductive carbon fiber decorated with vertically grown MoS 2 nanosheets and applied it in ASSLSBs. The chemical and electrochemical compatibility among MoS 2 , sulfur, and sulfide SSE can greatly improve the stability of the cathode and therefore maintain pristine interfaces between the different compositions for stable ion and electron transport. The presence of electrical-conductive metallic 1T MoS 2 and its uniform distribution on carbon fiber without aggregation benefit the electron transfer between carbon and sulfur. Meanwhile, the unique layered structure of MoS 2 can be intercalated by a large amount of Li atoms and therefore facilitate both ionic and electronic conductivity. In consequence, the charge transfer and reaction kinetics were greatly enhanced, and the decomposition of SSEs was successfully relieved. As a result, our ASSLSB delivered an ultrahigh initial discharge capacity of 1456 mAh g -1 with ultrahigh initial coulombic efficiency and maintained high-capacity retention of 78 % at 0.1 C after 220 cycles. The batteries also obtained remarkable rate performance of 1069 mAh g -1 at 1 C. This study pioneered new idea that fabricating the high performance ASSLSBs through developing surface functionalized and stabilized conductive carbon additives with metal sulfides.

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

High-Conductivity Argyrodite Li6PS5Cl Solid Electrolytes Prepared Via Optimized Sintering Processes for All-Solid-State Lithium-Sulfur Batteries

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

All-Solid-State Lithium-Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self-Lithiated Sn-C Interlayer

Tailoring the Interface between Sulfur and Sulfide Solid Electrolyte for High-Areal-Capacity All-Solid-State Lithium–Sulfur Batteries

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

Lithium‐Rich Li2TiS3 Cathode Enables High‐Energy Sulfide All‐Solid‐State Lithium Batteries

High-Performance All-Solid-State Li-S Batteries Enabled by Reaction Kinetics Enhancement and Interface Stabilization

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Superior All‐Solid‐State Batteries Enabled by a Gas‐Phase‐Synthesized Sulfide Electrolyte with Ultrahigh Moisture Stability and Ionic Conductivity

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

High-Performance Li-SeS x All-Solid-State Lithium Batteries.

Enhancing Ionic Conductivity and Electrochemical Stability of Li3PS4 Via Zn, F Co-Doping for All-Solid-State Li-S Batteries

High performance P-based argyrodite sulfide electrolytes enabled by Sb-based argyrodite doping for all-solid-state lithium metal batteries

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite