Abstract:Low-cost sulfurized polyacrylontrile (SPAN), which shows negligible polysulfide dissolution and stable cycling up to hundreds of cycles due to a solid-phase mechanism in carbonate-based electrolytes, is a valuable high-energy cathode material for long-lifespan lithium metal batteries (LMBs). 1 -3 However, the conventional carbonate-based electrolytes for commercial lithium-ion batteries are incompatible with lithium metal anodes (LMAs). 4 The unstable solid-electrolyte interphases (SEIs) result in lithium dendrite growth and low lithium stripping/plating CEs, which further cause safety concerns and limited lifespan of Li/SPAN cells with low negative to positive areal capacity (N/P) ratio. Therefore, the development of Li/sulfurized polyacrylonitrile (SPAN) batteries requires electrolytes that can form stable electrolyte/electrode interphases (EEIs) simultaneously on lithium metal anodes (LMAs) and SPAN cathodes. With the remarkable compatibility toward LMAs and low flammability, 4–7 locally concentrated ionic liquid electrolytes (LCILEs) might be promising candidates for Li/SPAN cells. Herein, a low-flammability locally concentrated ionic liquid electrolyte (LCILE) employing monofluorobenzene (mFBn) as the diluent is proposed for Li/SPAN cells. 8 Unlike non-solvating diluents in other LCILEs, mFBn partially solvates Li + , decreasing the coordination between Li + and bis(fluorosulfonyl)imide (FSI - ). In turn, this triggers a more substantial decomposition of FSI - and consequently results in the formation of a SEI rich in inorganic compounds, which enables a remarkable Coulombic efficiency (99.72%) of LMAs. Meanwhile, a protective cathode/electrolyte interphase (CEI), derived mainly from FSI - and organic cations, is generated on the SPAN cathodes, preventing the dissolution of polysulfides. Benefiting from the robust interphases simultaneously formed on both the electrodes, highly stable cycling of Li/SPAN cells for 250 cycles with a capacity retention of 71% is achieved employing the LCILE and only 80% lithium metal excess. References: (1) Wang, J. et al . A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries. Adv. Mater. 2002 , 14 (13–14), 963–965. (2) Shen, Z. et al . Tailored Electrolytes Enabling Practical Lithium-Sulfur Full Batteries via Interfacial Protection. ACS Energy Lett. 2021 , 6 (8), 2673–2681. (3) Wu, Z. et al . Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries. ACS Appl. Mater. Interfaces 2021 , 13 (27), 31733–31740. (4) Liu, X. et al . Enhanced Li + Transport in Ionic Liquid-Based Electrolytes Aided by Fluorinated Ethers for Highly Efficient Lithium Metal Batteries with Improved Rate Capability. Small Methods 2021 , 5 (7), 2100168. (5) Liu, X. et al . Locally Concentrated Ionic Liquid Electrolytes for Lithium-Metal Batteries. Angew. Chem. Int. Ed. 2023 , e202219318. (6) Liu, X. et al . Effect of Organic Cations in Locally Concentrated Ionic Liquid Electrolytes on the Electrochemical Performance of Lithium Metal Batteries. Energy Storage Mater. 2022 , 44 , 370–378. (7) Liu, X. et al . Difluorobenzene-Based Locally Concentrated Ionic Liquid Electrolyte Enabling Stable Cycling of Lithium Metal Batteries with Nickel-Rich Cathode. Adv. Energy Mater. 2022 , 12 (25), 2200862. (8) Liu, X. et al . Locally Concentrated Ionic Liquid Electrolyte with Partially Solvating Diluent for Lithium/Sulfurized Polyacrylonitrile Batteries. Adv. Mater. 2022 , 34 , 2207155.

A new ether-based medium-concentrated electrolyte for lithium–sulfur battery with lean Li anode

A novel mixed ether-based electrolyte for lithium–sulfur batteries with Li anode protection by dual salts

High-Performance Dual-Salt Electrolyte Based on Tetrahydrofuran and Dipropyl Ether for Lithium-Sulfur Battery

A Novel Zwitterionic Ionic Liquid-Based Electrolyte for More Efficient and Safer Lithium-Sulfur Batteries.

A new ether-based electrolyte for lithium sulfur batteries using a S@pPAN cathode.

A Compatible Carbonate Electrolyte with Lithium Anode for High Performance Lithium Sulfur Battery

Partially Fluorinated Ether As an Electrolyte Additive to Modify Electrode Surface and Suppress Dissolution of Polysulfides in Li-S Batteries

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Linear ether-based highly concentrated electrolytes for Li-sulfur batteries

High‐efficiency Lithium Metal Stabilization and Polysulfide Suppression in Li‐S Battery Enabled by Weakly Solvating Solvent

A Mixed Ether Electrolyte for Lithium Metal Anode Protection in Working Lithium–Sulfur Batteries

Long‐Life Lithium‐Ion Sulfur Pouch Battery Enabled by Regulating Solvent Molecules and Using Lithiated Graphite Anode

Fluorinated Co-Solvent Promises Li-S Batteries under Lean-Electrolyte Conditions

A Micelle Electrolyte Enabled by Fluorinated Ether Additives for Polysulfide Suppression and Li Metal Stabilization in Li-S Battery

Boosting High-Performance in Lithium-Sulfur Batteries Via Dilute Electrolyte.

High‐Fluorinated Electrolytes for Li–S Batteries

Locally Concentrated Ionic Liquid Electrolytes for Lithium/Sulfurized Polyacrylonitrile Batteries

Concentrated lithium salt-monoglyme complex for restraining polysulfide dissolution and improving electrochemical performance of lithium-sulfur batteries

A Fluorinated Lewis Acidic Organoboron Tunes Polysulfide Complex Structure for High‐Performance Lithium–Sulfur Batteries

Low‐Density Fluorinated Silane Solvent Enhancing Deep Cycle Lithium–Sulfur Batteries’ Lifetime

Lithium Polysulfide-Based Electrolytes for Li Metal Anodes