Abstract:Contact engineering on monolayer layer (ML) semiconducting transition metal dichalcogenides (TMDs) is considered the most challenging problem toward using these materials as a transistor channel in future advanced technology nodes. The typically observed strong Fermi-level pinning induced in part by the reaction of the source/drain contact metal and the ML TMD frequently results in a large Schottky barrier height, which limits the electrical performance of ML TMD field-effect transistors (FETs). However, at a microscopic level, little is known about how interface defects or reaction sites impact the electrical performance of ML TMD FETs. In this work, we have performed statistically meaningful electrical measurements on at least 120 FETs combined with careful surface analysis to unveil contact resistance dependence on interface chemistry. In particular, we achieved a low contact resistance for ML MoS2 FETs with ultrahigh-vacuum (UHV, 3 × 10-11 mbar) deposited Ni contacts, ∼500 Ω·μm, which is 5 times lower than the contact resistance achieved when deposited under high-vacuum (HV, 3 × 10-6 mbar) conditions. These electrical results strongly correlate with our surface analysis observations. X-ray photoelectron spectroscopy (XPS) revealed significant bonding species between Ni and MoS2 under UHV conditions compared to that under HV. We also studied the Bi/MoS2 interface under UHV and HV deposition conditions. Different from the case of Ni, we do not observe a difference in contact resistance or interface chemistry between contacts deposited under UHV and HV. Finally, this article also explores the thermal stability and reliability of the two contact metals employed here.

MoS2 Transistor with Weak Fermi Level Pinning via MXene Contacts (Adv. Funct. Mater. 43/2022)

MoS2 Transistor with Weak Fermi Level Pinning via MXene Contacts

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

Femtosecond Laser Irradiation-Mediated MoS2-Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors.

Femtosecond Laser Irradiation-Mediated MoS 2 –Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

Multifunctional MoS2 Transistors with Electrolyte Gel Gating.

Ohmic contacts in MXene/MoSi2N4 heterojunctions

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

A new insight for ohmic contacts to MoS 2 : by tuning MoS 2 affinity energies but not metal work-functions.

Approaching Ohmic Contacts for Ideal Monolayer MoS2 Transistors Through Sulfur-Vacancy Engineering

ZrTe2 Compound Dirac Semimetal Contacts for High-Performance MoS2 Transistors.

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

Epitaxial van der Waals contacts for low schottky barrier MoS 2 field effect transistors

Non-invasively Improving the Schottky Barrier of MoS2/metal Contacts by Inserting a SiC Layer

MoS2transistors gated by ferroelectric HfZrO2with MoS2/mica heterojunction interface

Strain-Gated Field Effect Transistor of a MoS2-ZnO 2D-1D Hybrid-Structure.

Tuning the metal–semiconductor contact nature in MXene-based van der Waals heterostructures

Asymmetric Chemical Functionalization of Top‐Contact Electrodes: Tuning the Charge Injection for High‐Performance MoS 2 Field‐Effect Transistors and Schottky Diodes

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Pushing the Performance Limit of Sub-100 nm Molybdenum Disulfide Transistors.