Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

Asymmetric Chemical Functionalization of Top‐Contact Electrodes: Tuning the Charge Injection for High‐Performance MoS 2 Field‐Effect Transistors and Schottky Diodes

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

Electrical contacts to few-layer MoS 2 with phase-engineering and metal intercalation for tuning the contact performance

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

Influence of Asymmetric Contact Form on Contact Resistance and Schottky Barrier, and Corresponding Applications of Diode

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

Electrical Contacts to Few-Layer MoS2 with Phase-Engineering and Metal Intercalation for Tuning the Contact Performance

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Electrochemical Construction of Edge‐Contacted Metal‐Semiconductor Junctions with Low Contact Barrier

Surface functionalization toward top-gated monolayer MoS2 field-effect transistors with ZrO2/Al2O3 as composite dielectrics

Molecular Approach to Electrochemically Switchable Monolayer MoS2 Transistors

Epitaxial van der Waals contacts for low schottky barrier MoS 2 field effect transistors

Electrochemical Surface Modification of a 2D MoS2 Semiconductor

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Enhanced Electrical Properties of Lithography-Free Fabricated MoS<sub>2</sub> Field Effect Transistors with Chromium Contacts

Enhancing the Performance of MoS2 Field-Effect Transistors Using Self-Assembled Monolayers: A Promising Strategy to Alleviate Dielectric Layer Scattering and Improve Device Performance

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Device simulation study of multilayer MoS 2 Schottky barrier field-effect transistors

Self-Assembled Monolayer Doping for MoTe2 Field-Effect Transistors: Overcoming PN Doping Challenges in Transition Metal Dichalcogenides

Soft-Etching Copper and Silver Electrodes for Significant Device Performance Improvement Toward Facile, Cost-Effective, Bottom-Contacted, Organic Field-Effect Transistors.

MoS2 Transistor with Weak Fermi Level Pinning via MXene Contacts