Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

MoS2 Transistor with Weak Fermi Level Pinning via MXene Contacts

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

MoS$_2$ Dual-gate Transistors with Electrostatically Doped Contacts

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

MoS2 Dual-Gate Transistors with Electrostatically Doped Contacts

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

High-Performance Wafer-Scale MoS2 Transistors Toward Practical Application

Femtosecond Laser Irradiation-Mediated MoS2-Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors.

Modified MXene: Promising Electrode Materials for Constructing Ohmic Contacts with MoS2for Electronic Device Applications

Monolayer MoS2-based Transistors with Low Contact Resistance by Inserting Ultrathin Al2O3 Interfacial Layer

Transport Properties of MoO&lt;sub&gt;3&lt;/sub&gt; Contacted Few-Layer MoS&lt;sub&gt;2&lt;/sub&gt; N-type Field-Effect Transistor

Enhanced contact resistance reduction in MoS2 transistors via ultrathin LiPON electrode interface doping

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

ZrTe2 Compound Dirac Semimetal Contacts for High-Performance MoS2 Transistors.

Femtosecond Laser Irradiation-Mediated MoS 2 –Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

Approaching Ohmic Contacts for Ideal Monolayer MoS2 Transistors Through Sulfur-Vacancy Engineering

Yttrium-induced phase-transition technology for forming perfect ohmic contact in two-dimensional MoS2 transistors

1T Phase As an Efficient Hole Injection Layer to TMDs Transistors: a Universal Approach to Achieve P-Type Contacts

Sub-10 Nm Monolayer MoS2 Transistors Using Single-Walled Carbon Nanotubes As an Evaporating Mask

Transport Properties Of Moo3 Contacted Few-Layer Mos2 N-Type Field-Effect Transistor