Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

Contact Resistance Engineering in WS2-Based FET with MoS2 Under-Contact Interlayer: A Statistical Approach

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Improving Electric Contacts to Two-Dimensional Semiconductors

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

Approaching Ohmic Contacts for Ideal Monolayer MoS2 Transistors Through Sulfur-Vacancy Engineering

Contact Research Strategy for Emerging Molybdenum Disulfide and Other Two-Dimensional Field-effect Transistors

Electrode Engineering in MoS2 MOSFET: Different Semiconductor/Metal Interfaces

Epitaxial van der Waals contacts for low schottky barrier MoS 2 field effect transistors

Femtosecond Laser Irradiation-Mediated MoS 2 –Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors

Femtosecond Laser Irradiation-Mediated MoS2-Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors.

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

MoS 2 Field-Effect Transistor Performance Enhancement by Contact Doping and Defect Passivation via Fluorine Ions and Its Cyclic Field-Assisted Activation

Performance Upper Limit of Sub-10 nm Monolayer MoS<sub>2</sub> Transistors with MoS<sub>2</sub>-Mo Electrodes

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

A Novel Contact Engineering Method for Transistors Based on Two-Dimensional Materials

Improved performance in MoS2 homogeneous junction field effect transistors by optimizing electrodes contact

Enhanced Electrical Properties of Lithography-Free Fabricated MoS<sub>2</sub> Field Effect Transistors with Chromium Contacts

Improving Electron Mobility in MoS2 Field-Effect Transistors by Optimizing the Interface Contact and Enhancing the Channel Conductance Through Local Structural Phase Transition

The Optimization of Contact Interface Between Metal/mos2 FETs by Oxygen Plasma Treatment