Abstract:Borides and silicide of tungsten as the refractory intermetallic compounds have high mechanical properties, relatively good thermal shock, and chemical stability. Also, they have less brittleness than ceramic compounds that can lead to its usage in various industrial applications. In this work, for the first time, an alumina-based composite (WB-WB 2 -WSi 2 -Al 2 O 3 ) was produced by combustion synthesis using aluminothermic reaction of a quaternary mixture (Al-Si-WO 3 -B 2 O 3 ) as starting materials. According to standards defined by Merzhanov, Munir, and Anselmi, the combustion synthesis process for the system of Al-Si-WO 3 -B 2 O 3 is the type of self-propagating high-temperature synthesis (SHS). The milled mixture was formed into cylindrical specimens after cold pressing and was heat-treated using an oxyacetylene flame as the initiator of self-propagating high-temperature synthesis in the air atmosphere. The ignition, the maximum combustion temperature, and the progress speed of the combustion front were measured using several thermocouples and data logger device. The phases formed in the synthesis samples were characterized by X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM). The results showed that the combustion front had a temperature above 1800 °C with a speed of about 20 mm·sec −1 . Microstructural observations showed the blades of tungsten borides with a hexagonal structure and spheres of tungsten silicates in the matrix of alumina phase. The average of particle size of borides and silicide of tungsten varies in the range of 100 to 200 nm, indicating the formation of sub-micron composite due to the high speed of the combustion synthesis process.

Effect of a NiO Additive on Interaction in a Ni–Al–W System in Self-Propagating High-Temperature Synthesis

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

The Effect of the Nickel Content and Mechanical Activation on Combustion in the 5Ti + 3Si + xNi System

The Effect of the Cobalt Content and Mechanical Activation on Combustion in the Ni + Al + Co System

Combustion synthesis of NiAl2O4 spinel powder

Self-Propagating High Temperature Synthesis (SHS) of Intermetallic Compounds Titanium and Nickel Aluminides

Preparation and Properties of W(al) Alloy Powders

Self-propagating high-temperature synthesis in Ti-W-C system

Effect of Additives on Self-Propagating High-Temperature Synthesis of Aln

Self-propagating High Temperature Synthesis of Ni0.35Zn0.65Fe2O4 Ferrite Powders

Effect of self-propagating high-temperature combustion synthesis on the deposition of NiTi coating by cold spraying using mechanical alloying Ni/Ti powder

Synthesis of Al2O3-WSi2-WB2-WB composite in Al-Si-WO3-B2O3 system by self-propagating high-temperature synthesis

Investigations of the nickel promotional effect on the reduction and sintering of tungsten compounds

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

The Effect of Tungsten Additive on the Surface Characteristics of Amorphous Ni–P Alloy

RESEARCH ON THE REACTION SYNTHESIS OF AlN-BASED CERAMICS WITH THE ADDITION OF Y2O3

Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide

Structure and Phase Formation in the Ni–Al–Co System during Self-Propagating High-Temperature Synthesis

Self-propagating High-temperature Synthesis and Reaction Mechanism of Super-fine Particles of γ-LiAlO2

Combustion synthesis of fine aluminum nitride powders under micropositive N 2 pressure with water additive

Self-propagating High Temperature Synthesis and Magnetic Properties of Ni 0.35 Zn 0.65 Fe 2 O 4 Powders