Abstract:This work investigates the evolution of the crystal structure of the topologically closed packed orthorhombic P phase precipitate in a Re-containing Ni-based single crystal superalloy during thermal exposure. The P phase is formed with a thin needle morphology. The precipitate is formed from the matrix with an initial complex atomic arrangement which continues to evolve during the process of thermal exposure. Based on the experimental evidence of this study and the theoretically predicted structure reported in the literature, a mechanism of the structural transformation is proposed. The initial structure is composed of a parallelogram (P) atomic arrangement configuration, which gradually evolve into a rectangle (R) atomic arrangement configuration in the [100]P projection. In the [010] projection, the initial structure is composed of alternating rows of a larger parallelogram (P') and a larger rectangle (R') configurations, which gradually evolve into an intricate structure of P'-R' along the length [001]P direction and P'P'-R'R' along the transverse [100]P direction. The initial structure is formed for its structural similarities to the γ phase to minimize lattice mismatch. The final structure is evolved over time to conform to its thermodynamically more stable state. The structural evolution is achieved by collective atomic shuffling. These intricate atomic arrangements gives rise to the very faint and highly dense parallel striation lines along the transverse [010]P direction in [100]P view and along the length [010]P direction in [010]P view under transmission electron microscopy observation.

Structure and Phase Formation in the Ni–Al–Co System during Self-Propagating High-Temperature Synthesis

Polymorphism of High-Temperature Aluminothermic Synthesis Products in the Ni–Al–Co System

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Structure-Phase Status of the High-Entropy AlNiNbTiCo Alloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

Superplastic behavior of a Ni-Co-base superalloy with high γ′-phase content

Hot deformation behavior and workability of a Ni–Co based superalloy

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Phase Relations of the Sm–Ni–Al Ternary System at 800 °C in the 30–100 at.% Al Region

On the Solidification and Phase Stability of a Co-Cr-Fe-Ni-Ti High-Entropy Alloy

Synthesis and Microstructure Investigation of Ni40Ti50Cu10 Intermetallic Shape Memory Alloys by Self-Propagating Combustion Method

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Effect of Extrusion Process on Microstructure and Mechanical Properties of Ni3Al-B-Cr Alloy During Self-Propagation High-Temperature Synthesis

Formation of hypoeutectic structure and strengthening mechanism of Co4Cr1.5Fe1.5Ni5 high entropy alloy alloyed by Al

Phase Formation during Heating of Amorphous Nickel-Based BNi-3 for Joining of Dissimilar Cobalt-Based Superalloys

Coarse-grained superplasticity of a Ni-Co-based superalloy

Phase transformation and strengthening of the gas-atomized FeCoCrNiMo0.5Al1.3 high-entropy alloy powder during annealing

Microstructure Evolution of FeNiCoCrAl1.3Mo0.5 High Entropy Alloy during Powder Preparation, Laser Powder Bed Fusion, and Microplasma Spraying

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

The Effect of the Cobalt Content and Mechanical Activation on Combustion in the Ni + Al + Co System