Abstract:An intermetallic alloy based on the Heusler phase—Cu 2 TiAl—has been obtained by self-propagating high-temperature synthesis (SHS) in the Cu–Ti–Al system for the first time. The modes of frontal combustion of the green mixtures and the processes of phase formation during synthesis have been studied. The resulting products have been studied by X-ray analysis (including high-temperature diffractometry with step heating up to 900 K), scanning electron microscopy, and differential thermal analysis (DTA), and some physical properties have been studied. Electrophysical and magnetic measurements are also carried out for the alloy. The results of X-ray analysis and scanning electron microscopy using energy-dispersive analysis (EDA) have shown that the content of the Heusler phase in the synthesized product is at least 82%. The product also contains copper (Cu nine Al 4 ) and titanium (Ti 3 Al 2 ) aluminides. The temperature dependence of the electrical resistivity of the synthesized product is measured for a wide temperature range of 90–1000 K. The resistivity at T = 300 K is 0.3 μm Ωm. The metallic type of conductivity for obtained samples and the anomalous behavior of the temperature curve of electrical resistance in the region of 770–790 K are revealed. Thermal analysis is used to measure the melting point of the synthesized product and reveal additional heat effects at 788, 848, and 1248 K associated with possible phase transitions in the Cu 2 TiAl intermetallic compound. One possible mechanism of these phase transitions is considered in accordance with the phase diagram of the Cu–Ti–Al system. Magnetic measurement results show that intermetallic samples of the compound obtained by the SHS method exhibit weak ferromagnetic properties with residual magnetization of 0.069 A m 2 /kg.

Polymorphism of High-Temperature Aluminothermic Synthesis Products in the Ni–Al–Co System

Structure and Phase Formation in the Ni–Al–Co System during Self-Propagating High-Temperature Synthesis

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

Synthesis and characterization of nanoparticles of Alnico alloys

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Preparation of NiAl2O4/Al2O3 composite nanopowder

Al3+ ions dependent structural and magnetic properties of Co-Ni nano-alloys

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Microstructure and mechanical properties of a novel polycrystalline Ni3Al-based intermetallic alloy

Hot deformation behavior and workability of a Ni–Co based superalloy

Synthesis of an Intermetallic Alloy Based on 2Cu–Ti–Al: Structure Analysis and Electrophysical Properties

Structure-Phase Status of the High-Entropy AlNiNbTiCo Alloy

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Promising ferromagnetic Ni–Co–Al shape memory alloy system

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

Chemical and Structural Analysis of Newly Prepared Co-W-Al Alloy by Aluminothermic Reaction

Revealing essence of magnetostructural coupling of Ni-Co-Mn-Ti alloys by first-principles calculations and experimental verification

Effects of High Al Content on the Phase Constituents and Thermal Properties in NiCoCrAlY Alloys

A Study on the Phase Formation and Magnetic Properties of FeNiCoCuM (M = Mo, Nb) High-Entropy Alloys Processed Through Powder Metallurgy

Solid-state Reaction to Synthesize Ni-Mo Metastable Alloys

Effect of synthesis route on structure and properties of AlCoCrFeNi high-entropy alloy