Abstract:The goal of this research was to propose a combined modeling approach to design a stable alloy based on the FeMnNiCoMo system. First, phase stability calculations were made using valence electron calculations (VEC) and density functional theory (DFT) methods. The effect of Mo alloying in the FeMnNiCo system was investigated by calculating characteristics of solid solution combined with the different methods. The DFT method was used to obtain formation enthalpy in the (FeMnNiCo)100–xMox system for stable face-centered-cubic (fcc) and body-centered-cubic (bcc) structures. The calculations were made for Mo contents from 0 to 20 at. pct. Classic thermodynamic calculations, such as mixing enthalpy, configurational entropy, or valence electron concentration (VEC), were used. Based on these calculations, the proposed alloy should be characterized by fcc structure in the entire considered Mo content, without occurrence of any intermetallic phases. Subsequently, three alloys with 0, 5, and 10 at. pct Mo were produced using arc melting and were further investigated. Alloys were homogenized and then hot rolled into flat bars. Microstructural analysis was performed using as-cast, after-homogenization, and hot-rolled specimens. The microstructures were characterized by means of scanning electron microscopy–energy-dispersive spectroscopy (EDS) analysis. Mechanical properties were evaluated using tensile and compression tests. In addition, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses were also conducted. The results from EDS and XRD showed the occurrence of intermetallic phases in investigated alloys, as phase with Fm3-m space group and in µ phase in (FeMnNiCo)90Mo10 alloy. Based on the comparison of the experimental and calculated results, conclusions regarding the structural changes with Mo content were drawn and the validity of the proposed modeling approach was tested and discussed.

Solid-state Reaction to Synthesize Ni-Mo Metastable Alloys

Phase Evolution Upon Ion Mixing and Solid-State Reaction and Thermodynamic Interpretation in the Ni-Nb System

Molecular dynamics study of solid state interfacial reaction in the Ni-Mo system

Formation of Metastable Crystalline Phases by Solid State Reaction in Ni-Nb Multilayered Films

Inversion calculation of the interatomic potentials for Ni0.75AlxMo0.25-x alloy employing microscopic phase-field model

Formation of A Hexagonal-Close-Packed Phase in Ni3r (R = Mo, Nb, Ta) Multilayered Films by Solid-State Reaction

Solid-State Amorphization in Ni/Mo Multilayers Studied with Molecular-Dynamics Simulation

Solid State Phase Transition Induced by Ion Irradiation in the Co-Nb System: Experiments and Thermodynamics

Formation of Metastable Alloy Films in the Ni-Mo Binary System by Ion-Beam-assisted Deposition

Metastable alloys synthesised by ion mixing and thermodynamic and kinetic modelling

Alloying In An Immiscible Cu-Nb System Upon Solid-State Reaction

Experimental study on phase relations in the Al-Mo-Nb ternary system

Solid-state Amorphization in Ni/Nb Mutilayers Studied by Molecular-Dynamics Simulation Together with Experiments

Effect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy Alloys

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

Phase Diagrams of High-Entropy Alloy System Al-Co-Cr-Fe-Mo-Ni

Phase Relations of the Sm–Ni–Al Ternary System at 800 °C in the 30–100 at.% Al Region

Nonequilibrium Alloy Formation In The Immiscible Cu-Mo System Studied By Thermodynamic Calculation And Ion Beam Mixing

Construction of an N -Body Potential and Molecular-Dynamics Study of Interfacial Reaction in the Ni/Mo Bilayer

Unusual Alloying Behavior Observed in the Immiscible AgMo and AgNb Systems under Ion Irradiation