Abstract:Structure, crystallization behavior, and magnetic properties of as-quenched and annealed Fe81.3Si4B13Cu1.7 (Cu1.7) alloy ribbons and effects of Nb alloying have been studied. Three-dimensional atom probe and transmission electron microscopy analyses reveal that high-number-density Cu-clusters and Pre-existing Nano-sized α-Fe Particles (PN-α-Fe) are coexistence in the melt-spun Cu1.7 amorphous matrix, and the PN-α-Fe form by manners of one-direction adjoining and enveloping the Cu-clusters. Two-step crystallization behavior associated with growth of the PN-α-Fe and subsequent nucleation and growth of newly-formed α-Fe is found in the primary crystallization stage of the Cu1.7 alloy. The number densities of the Cu-clusters and PN-α-Fe in melt-spun Fe81.3−xSi4B13Cu1.7Nbx alloys are gradually reduced with enriching of Nb, and a fully amorphous structure forms at 4 at.% Nb, although smaller Cu-clusters still exist. After annealing, 2 at.% Nb coarsens the average size (Dα-Fe) of the α-Fe grains from 14.0 nm of the Nb-free alloy to 21.6 nm, and 4 at.% Nb refines the Dα-Fe to 8.9 nm. The mechanisms of the α-Fe nucleation and growth during quenching and annealing for the alloys with large quantities of PN-α-Fe as well as after Nb alloying have been discussed, and an annealing-induced α-Fe growth mechanism in term of the barrier co-contributed by competitive growth among the PN-α-Fe and diffusion-suppression effect of Nb atoms has been proposed. A coercivity (Hc) ∝ Dα-Fe3 correlation has been found for the nanocrystalline alloys, and the permeability is inverse with the Hc.

Alloying In An Immiscible Cu-Nb System Upon Solid-State Reaction

Abnormal Alloying Behaviour Observed in an Immiscible Zr–Nb System

Formation of Amorphous Phases in an Immiscible Cu–Nb System Studied by Molecular Dynamics Simulation and Ion Beam Mixing

Unusual Alloying Behavior At The Equilibrium Immiscible Cu-Nb Interfaces

Interface-Driven Solid-State Alloying in an Immiscible Cu-W System

Nonequilibrium Alloy Formation In The Immiscible Cu-Mo System Studied By Thermodynamic Calculation And Ion Beam Mixing

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Phase Evolution Upon Ion Mixing and Solid-State Reaction and Thermodynamic Interpretation in the Ni-Nb System

Metastable phases formation in Cu–Nb films by ion-beam-assisted deposition

Unusual Alloying Behavior Observed in the Immiscible AgMo and AgNb Systems under Ion Irradiation

Experimental study on phase relations in the Al-Mo-Nb ternary system

Metastable alloys synthesized by ion mixing in immiscible Ti–Nb and Ti–Ta systems

Synthesis of Amorphous Alloys and Amorphous-Crystalline Composites in the Cu-Nb-Hf System by Ion Beam Mixing

Microstructural evolution in Cu–Nb processed via friction consolidation

Formation and Crystallization Behavior of Fe-based Amorphous Precursors with Pre-Existing Α-Fe Nanoparticles—structure and Magnetic Properties of High-Cu-content Fe-Si-B-Cu-Nb Nanocrystalline Alloys

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Formation of Nanocrystals in an Amorphous Phase of Multicomponent Systems

Solid-state Reaction to Synthesize Ni-Mo Metastable Alloys

Formation of Equiaxed Crystal Structures in Directionally Solidified Al-Si Alloys Using Nb-based Heterogeneous Nuclei

Mechanical Alloying of the Immiscible Cu-60wt%Cr Alloy: Phase Transitions, Microstructure, and Thermodynamic Characteristics

Interface-mediated Structural Evolution of Immiscible Co-Cu Multilayers Upon Solid-State Reaction