Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Interface-Driven Solid-State Alloying in an Immiscible Cu-W System

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Interface-mediated Structural Evolution of Immiscible Co-Cu Multilayers Upon Solid-State Reaction

Alloying In An Immiscible Cu-Nb System Upon Solid-State Reaction

Nonequilibrium Alloy Formation In The Immiscible Cu-Mo System Studied By Thermodynamic Calculation And Ion Beam Mixing

Alloying mechanisms of binary immiscible systems based on tungsten-copper composite materials

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Irradiation-induced Alloying in Immiscible Mo–Cu System Through Multilayer Technique

Construction of an n-Body Potential for Revealing the Atomic Mechanism for Direct Alloying of Immiscible Tungsten and Copper

Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys

The nucleation and growth mechanism of solid-state amorphization and diffusion behavior at the W-Cu interface

Formation of Amorphous Alloys by Ion Beam Mixing and Its Multiscale Theoretical Modeling in the Equilibrium Immiscible Sc-W System.

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Construction of a new n -body potential and multi-scale investigations of the direct alloying behaviors for immiscible W/Cu system

Study of metastable alloy formation by thermodynamic calculation and ion beam manipulation in an equilibrium immiscible Au–W system

Metastable alloys synthesized by ion mixing in immiscible Ti–Nb and Ti–Ta systems

Structural Phase Evolution in the Equilibrium Immiscible Co–Cu System Studied by Solid-State Reaction/Ion Beam Mixing of Nano-Sized Multilayers

Metastable Phase Formation in the Immiscible Cu–Co System Studied by Thermodynamic, Molecular Dynamics Andab Initiocalculations Together with Ion Beam Mixing

Metastable Phase Formed in Immiscible Cu-W Multilayers by Ion Mixing

Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism

Metastable Structures of Immiscible System Induced by Mechanical Alloying