Abstract:Knitted textiles are a popular reinforcement in polymer composites for their high drape properties and superior impact energy absorption, making them suitable for specific composite components. Nevertheless, limited attention has been paid to modeling the mechanical behavior of knitted fabric composites since knitted textiles generally offer lower stiffness and strength. This study presents a 3D finite element (FE) modeling of a precise geometrical model of weft-knitted carbon fiber thermoplastic composite to better understand its nonlinear mechanical behavior and interface damage mechanisms under tension. Toward this end, a representative volume element (RVE) of the weft-knitted fabric composite with periodic boundary conditions (PBCs) is generated based on actual dimensions. The validity of the textile RVE to represent the macroscopic behavior was evaluated prior to analyzing the composite. The effect of fiber tow/matrix debonding during tension on the mechanical behavior of the composite is investigated using the cohesive zone model (CZM). Finally, the predicted results of the mechanical behavior of the composite with and without considering the interface failure are compared with the experimental measurements. It is found that the fiber tow/matrix interfacial strength has a significant effect on the tensile performance of the knitted fabric composites, particularly when they are subjected to a large strain. According to the simulation results, the highest tensile performance of the composite is achieved when the interfacial debonding is prevented. However, considering the fiber/matrix debonding in the modeling is essential to achieve a good agreement with the experimental results. In addition, it is concluded that stretching the fabric before composite manufacturing can substantially increase the tensile stiffness of the knitted composite.

Finite element modeling and simulation of yarn in winding process

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

A Numerical Simulation on Heat Transfer of Fabric Based on the Yarn Interweaved Structure

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Mathematical modeling and numerical simulation of nonlinearly elastic yarn in ring spinning

Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Viscoelastic tensile model of core/wrapped composite yarn with double filament

Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

Yarn/Yarn Friction Analysis Considering the Weaving Process of Textile Fabrics: Analytical Model and Experimental Validation

Finite element simulation of an auxetic plied yarn structure

Tensile theoretical modeling and auxetic behavior analyzing of negative Poisson's ratio yarn

Modeling and characterization of the mechanical properties of nanofiber yarn

Mathematical modeling of dynamic yarn input tension on circular weft knitting machine with positive storage feeding

Computational modeling of the strength of staple yarn based on the random arrangement of fibers

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Yarn-level numerical simulation based on micro-CT reconstruction for the stentering process of warp-knitted three-dimensional mesh fabric

Predicting the Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method

A Finite Element Approach of the Behaviour of Woven Materials at Microscopic Scale

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Investigation of forming process and deformation mechanisms of 3D warp interlock fabric