Abstract:Knitted textiles are a popular reinforcement in polymer composites for their high drape properties and superior impact energy absorption, making them suitable for specific composite components. Nevertheless, limited attention has been paid to modeling the mechanical behavior of knitted fabric composites since knitted textiles generally offer lower stiffness and strength. This study presents a 3D finite element (FE) modeling of a precise geometrical model of weft-knitted carbon fiber thermoplastic composite to better understand its nonlinear mechanical behavior and interface damage mechanisms under tension. Toward this end, a representative volume element (RVE) of the weft-knitted fabric composite with periodic boundary conditions (PBCs) is generated based on actual dimensions. The validity of the textile RVE to represent the macroscopic behavior was evaluated prior to analyzing the composite. The effect of fiber tow/matrix debonding during tension on the mechanical behavior of the composite is investigated using the cohesive zone model (CZM). Finally, the predicted results of the mechanical behavior of the composite with and without considering the interface failure are compared with the experimental measurements. It is found that the fiber tow/matrix interfacial strength has a significant effect on the tensile performance of the knitted fabric composites, particularly when they are subjected to a large strain. According to the simulation results, the highest tensile performance of the composite is achieved when the interfacial debonding is prevented. However, considering the fiber/matrix debonding in the modeling is essential to achieve a good agreement with the experimental results. In addition, it is concluded that stretching the fabric before composite manufacturing can substantially increase the tensile stiffness of the knitted composite.

Predicting the Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method

Woven Geotextile Permeability under Uniaxial and Laterally Constrained Conditions

Computer Simulation of Mechanical Properties of Nonwoven Geotextiles in Soil-Fabric Interaction

Finite Element Modelling for Tensile Behaviour of Thermally Bonded Nonwoven Fabric

Permeability Prediction in Nonwoven Geotextiles Using Mathematical Modeling and Numerical Simulation

Analytical prediction and experimental research on pore size of nonwoven geotextiles under unconfined uniaxial tensile strain

Prediction of Pore Size Characteristics of Woven Slit-Film Geotextiles Subjected to Tensile Strains

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Modeling the tensile behaviour of needle punched nonwoven geotextiles

Numerical investigation of the tensile behaviors of needle-punched nonwoven geotextiles

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

A Computationally Efficient Model to Predict the Uniaxial Tensile Loading Response for Dry Woven Fabrics

Modeling the shear behavior of spunbond nonwoven fabrics using the finite element method

Finite element simulation of textile materials at the fiber scale

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

Computerized Failure Analysis of Nonwoven Fabrics Based on Fiber Failure Criterion

A Finite Element Approach of the Behaviour of Woven Materials at Microscopic Scale

Mechanical Prediction and Experimental Verification of Self-Lubricating Fabric Composites

Fiber Arrangement Characteristics and Their Effects on Nonwoven Tensile Behavior

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach