Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Progressive failure analysis of 2D woven composites at the meso-micro scale

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Modeling the stiffness, strength, and progressive failure behavior of woven fabric-reinforced composites

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Predicting the Failure Behavior of Textile Composite Laminates by Using a Multi-Scale Correlating Approach

An Effective Progressive Damage Analysis Method for Failure Analysis of Composite Scarf Joint

Progressive Damage Analysis and Strength Prediction of 2D Plain Weave Composites

Multiscale Progressive Damage Model for Plain Woven Composites

A Progressive Damage Model For 3d Woven Composites Under Compression

A Novel Multiscale Prediction Strategy for Simulating the Progressive Damage Behavior of Plain-Woven Bamboo Fabrics Reinforced Epoxy Resin Composites

On the meso-mechanical modeling method for textile composites

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

Progressive Failure Simulation of Notched Tensile Specimen for Triaxially-Braided Composites.

A New Analytical Method for Progressive Failure Analysis of Two-Dimensional Triaxially Braided Composites

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

An Analytical Constitutive Model for Progressive Damage Analysis of Three‐dimensional Braided Composites

Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension