Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Prediction of the inter-fiber mechanical properties of composites: Part II Failure criterion based on micromechanics and cross-scale stress calculation

Micro Failure Analysis of Fiber Metal Laminates

A 3D Micromechanics-Based Failure Criterion for Fiber Reinforced Composites under Longitudinal Compression

Prediction of the Inter-Fiber Mechanical Properties of Composites: Part I Standardization Micro-Scale Modelling Method and Damage Analysis

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

A theoretical and experimental assessment of 3D macroscopic failure criteria for predicting pure inter-fiber fracture of transversely isotropic UD composites

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Failure prediction for fiber reinforced polymer composites based on virtual experimental tests

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Computational micromechanics model based failure criteria for chopped carbon fiber sheet molding compound composites

Prediction of the failure behavior of pseudo-ductile composites using a multi-scale finite element model

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites

On micromechanics approach to stiffness and strength of unidirectional composites

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Prediction of overall tension behavior of short fiber-reinforced composites

Failure analysis of unidirectional fiber reinforced plastics based on computational micromechanics and PUCK failure theory