Abstract:A micromechanical model based on probabilistic principles is proposed to determine the effective fracture toughness increment and the bridging stress-crack opening displacement relationship for brittle matrix composites reinforced with short, poorly bonded fibers. Emphasis is placed on studying the effect of fiber extensibility on the bridging stress and the bridging fracture energy, and to determine its importance in cementitious matrix composites. Since the fibers may not be in an ideal aligned or random state, the analysis is placed in sufficiently general terms to consider any prescribable fiber orientation distribution. The model incorporates the snubbing effect observed during pull-out of fibers inclined at an angle to the crack face normal. In addition, the model allows the fibers to break; any fiber whose load meets or exceeds a single-valued failure stress will fracture rather than pull out. The crack bridging results may be expressed as the sum of results for inextensible fibers and an additional term due to fiber extensibility. An exact analysis is given which gives the steady-state bridging toughness G directly, but presents a non-linear problem for the bridging stress-crack opening (σb – δ) relationship. An approximate analysis is then presented which gives both G and σb – δ directly. To illustrate the effect of extensibility on bridging stress and fracture energy increment due to bridging fibers, a comparison with the inextensible fiber case is provided. It is found that effect of extensibility on fracture energy is negligible for common materials systems. However, extensibility may have a significant effect on the bridging stress-crack opening relationship. The effect of other physical and material parameters such as fiber length, fiber orientation and snubbing friction coefficient is also studied.

Prediction of overall tension behavior of short fiber-reinforced composites

Mechanical behavior of a fiber end in short fiber reinforced composites

Crack bridging model for fibre reinforced concrete under fatigue tension

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Modelling of Bridging Toughening in Fiber-Reinforced Composites

Effect of Multiple Matrix Cracking on Crack Bridging of Fiber Reinforced Engineered Cementitious Composite

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Fatigue failure mechanism analysis and life prediction of short fiber reinforced polymer composites under tension-tension loading

Doubly periodic arrays of bridged cracks and short fibre-reinforced cementitious composites

Simulation of crack propagation of fiber reinforced cementitious composite under direct tension

Effect of Fiber Extensibility on the Fracture Toughness of Short Fiber or Brittle Matrix Composites

A micromechanical crack bridging model considering the slip-softening interface with the residual shear stress for SFRCC

Prediction of Tensile Strength of Short Fiber Reinforced Elastomer Composites

Prediction of the inter-fiber mechanical properties of composites: Part II Failure criterion based on micromechanics and cross-scale stress calculation

Tensile properties of short fiber composites with fiber strength distribution

Simulation of Crack Propagation in Fiber-Reinforced Concrete by Fracture Mechanics

Experimental Study on Crack Bridging in FRC under Uniaxial Fatigue Tension

THEORETICAL ANALYSIS OF STRESS DISTRIBUTIONS IN FRP SIDE-BONDED TO RC BEAMS FOR SHEAR STRENGTHENING

Predicting shear strength of steel fiber reinforced concrete beam-column joints by modified compression field theory

Phase field fracture predictions of microscopic bridging behaviour of composite materials

Unified analysis for tailorable multi-scale fiber reinforced cementitious composites in tension