Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

A Multiscale Method Across Three Length Scales for Progressive Damage Analysis of Plain Woven Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Multiscale Progressive Damage Model for Plain Woven Composites

Three-scale modeling and probabilistic progressive damage analysis of woven composite laminates

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

Micromechanics-based Multiscale Progressive Failure Simulation of 3D Woven Composites under Compressive Loading with Minimal Material Parameters

Multiscale modelling of progressive damage in fiber-reinforced composites

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Multiscale Modeling of Mechanical Behavior and Failure Mechanism of 3D Angle-Interlock Woven Aluminum Composites Subjected to Warp/weft Directional Tension Loading

Multi-scale Structure Modeling of Damage Behaviors of 3D Orthogonal Woven Composite Materials Subject to Quasi-Static and High Strain Rate Compressions

Multiscale Study on Compressive Failure Mechanism of Plain Woven Composites Considering Stochastic Waviness Defects

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

A Novel Multiscale Modeling Strategy of the Low-Velocity Impact Behavior of Plain Woven Composites

Multiscale damage modelling of 3D woven composites under static and impact loads

Multi-scale Structure Finite Element Analyses of Damage Behaviors of Multi-Axial Warp-Knitted Composite Materials Subjected to Quasi-Static and High Strain Rate Compressions

Multiscale Modeling of the Mechanical Behavior of 3D Braided CFRP Composites under Uniaxial Tension

Efficient Multiscale Analysis Method for the Compressive Progressive Damage of 3D Braided Composites Based on FFT

Hierarchical Multi-Scale Analysis of the Effect of Varying Fiber Bundle Geometric Properties on the Mechanical Properties of 3D Braided Composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites