Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Ting-Ting Li,Jiunn Fang,Chen-Hung Huang,Ching-Wen Lou,Jan-Yi Lin,Mei-Chen Lin,Yueh-Sheng Chen,Jia-Horng Lin

DOI: https://doi.org/10.1177/0040517516652343

IF: 2.3

2016-09-02

Textile Research Journal

Abstract:Research on the simulation and modeling of dynamic puncture penetration is more complex problem due to full consideration of the tightness of the fabric and the sharp profile of the puncture. This study presents numerical simulation of complicated dynamic puncture behaviors on the basis of the roles of extension and stress-wave transmission on the deformation. The unit cell model was used to simulate the yarn crimp and extension during the uniaxial dynamic puncture process. In addition, the puncture deformation and stress distribution of woven fabrics with different elastic modulus and friction distance were simulated followed with dynamic puncture penetration. The result shows that dynamic puncture damage critically depends on the elastic modulus of yarns and the distance between yarns; the inter-yarn distance affects dynamic puncture resistance more significantly. Dynamic puncture stress nonlinearly increases with the elastic modulus, and linearly decreases with yarn distance. The research result indicates that weaving density can be increased to improve dynamic puncture resistance more obviously.

materials science, textiles