Abstract:In the production of needle-punched nonwoven fabrics, the direction of needle barbs is towards the tip of the needle. When the needle penetrates into the fabric, the barbs carry some fibres into the fabric and when it returns the barbs are empty. This means that, the needle works when it penetrates into the fabric and doesn't work when it returns. Using a bi-directional barb needle in the needle-punch process was proposed as an idea with the theory that, the needle also works when returning (leaving the layer). This study investigates the physical properties of needle-punched nonwoven fabrics produced with unidirectional and bi-directional needle types. Effects of needle penetration depth (NPD), strokes per minute (SPM), and needle type (N 1 , N 2 ) on properties such as gram per square meter (GSM), thickness, fabric density (FD), and static puncture resistance (SPR) are examined. An experiment with 19 runs was designed using response surface methodology and optimal design with two quantitative factors, including NPD and SPM, and one qualitative factor containing needle types. In addition, four responses were measured and reported, including GSM, thickness, FD, and SPR. Test results show that needle N 2 produces a fabric with lower FD, higher GSM, thickness, and SPR in comparison to needle N 1 , and was selected in optimization process with a desirability value of 0.872 against 0.688 for needle N 1 . The improved fabric properties of needle N 2 may be exploited for the economic benefits of the nonwoven fabric producers or textile industry.

Dynamic puncture modeling of polyester needle-punched nonwoven geotextile fabrics using finite element method

Dynamic puncture behavior of the calendered geotextile compound fabrics: optimization using the Taguchi design of experiment

Permeability Prediction in Nonwoven Geotextiles Using Mathematical Modeling and Numerical Simulation

Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Modeling the tensile behaviour of needle punched nonwoven geotextiles

Woven Geotextile Permeability under Uniaxial and Laterally Constrained Conditions

PREDICTION OF THE VERTICAL PERMEABILITY COEFFICIENT BASED ON FRACTAL THEORY FOR WOVEN SLIT-FILM GEOTEXTILES

The Effect Of Pore Size Deformation On Multi-Pore Model Of Woven Geotextiles In Tension Test

Analytical prediction and experimental research on pore size of nonwoven geotextiles under unconfined uniaxial tensile strain

Numerical investigation of the tensile behaviors of needle-punched nonwoven geotextiles

Static and dynamic puncture failure behaviors of 3D needle-punched compound fabric based on Weibull distribution

Prediction of Pore Size Characteristics of Woven Slit-Film Geotextiles Subjected to Tensile Strains

Analysis of Pore Size Distributions of Nonwoven Geotextiles Subjected to Unequal Biaxial Tensile Strains

Evaluation of high-modulus, puncture-resistance composite nonwoven fabrics by response surface methodology

Predicting the Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method

Quasi-static puncture resistance behaviors of architectural coated fabric

Static and dynamic puncture properties of intra-/inter-laminar reinforced multilayer compound fabrics by needle-punching and thermal bonding

Permeability of needle-punched nonwoven geotextiles subjected to uniaxial tensile strains

Modeling the shear behavior of spunbond nonwoven fabrics using the finite element method

A comparative study of physical properties of nonwoven fabrics produced by uni- and bi-directional needles using response surface methodology

Effects of needle punching and hot pressing on mechanical properties of composite geotextiles