Abstract:Knitted textiles are a popular reinforcement in polymer composites for their high drape properties and superior impact energy absorption, making them suitable for specific composite components. Nevertheless, limited attention has been paid to modeling the mechanical behavior of knitted fabric composites since knitted textiles generally offer lower stiffness and strength. This study presents a 3D finite element (FE) modeling of a precise geometrical model of weft-knitted carbon fiber thermoplastic composite to better understand its nonlinear mechanical behavior and interface damage mechanisms under tension. Toward this end, a representative volume element (RVE) of the weft-knitted fabric composite with periodic boundary conditions (PBCs) is generated based on actual dimensions. The validity of the textile RVE to represent the macroscopic behavior was evaluated prior to analyzing the composite. The effect of fiber tow/matrix debonding during tension on the mechanical behavior of the composite is investigated using the cohesive zone model (CZM). Finally, the predicted results of the mechanical behavior of the composite with and without considering the interface failure are compared with the experimental measurements. It is found that the fiber tow/matrix interfacial strength has a significant effect on the tensile performance of the knitted fabric composites, particularly when they are subjected to a large strain. According to the simulation results, the highest tensile performance of the composite is achieved when the interfacial debonding is prevented. However, considering the fiber/matrix debonding in the modeling is essential to achieve a good agreement with the experimental results. In addition, it is concluded that stretching the fabric before composite manufacturing can substantially increase the tensile stiffness of the knitted composite.

Mathematical modeling of dynamic yarn input tension on circular weft knitting machine with positive storage feeding

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Finite element modeling and simulation of yarn in winding process

Mathematical modeling and numerical simulation of nonlinearly elastic yarn in ring spinning

Statistical modelling of tensile properties of natural fiber yarns considering probability distributions of fiber crimping and effective yarn elastic modulus

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Tensile theoretical modeling and auxetic behavior analyzing of negative Poisson's ratio yarn

Mathematical Model for Yarn Unwinding Part Ι: Cylindrical Packages

A Computationally Efficient Model to Predict the Uniaxial Tensile Loading Response for Dry Woven Fabrics

Modeling the tensile behaviour of needle punched nonwoven geotextiles

Unravelling the Mechanics of Knitted Fabrics Through Hierarchical Geometric Representation

Viscoelastic tensile model of core/wrapped composite yarn with double filament

Modeling the flexural rigidity of spunlace nonwoven fabrics

Finite element simulation of an auxetic plied yarn structure

Yarn-level numerical simulation based on micro-CT reconstruction for the stentering process of warp-knitted three-dimensional mesh fabric

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

The effects of the tension on the yarn dynamics

Artificial neural network-assisted theoretical model to predict the viscoelastic–plastic tensile behavior of polyamide-6 multi-ply yarns

Yarn tension control technique for improving polyester soft winding process