Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

Finite element simulation of an auxetic plied yarn structure

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Tensile theoretical modeling and auxetic behavior analyzing of negative Poisson's ratio yarn

Geometric Analysis of Three-Dimensional Woven Fabric with in-Plane Auxetic Behavior

Effect of structural parameters on formability of auxetic weft-knitted fabrics based on zigzag structure

A study of tubular braided structure with negative Poisson’s ratio behavior

Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method

A novel three-component helical auxetic yarn with staple fibers prepared by ring spinning

In Situ X‐Ray Tomography of Sintered Metal Fiber Felts Exhibiting Auxetic Effect under Tension and Compression

A Finite Element Simulation Study on the Properties of a Multi-Material Based Auxetic Metamaterial

Finite element modeling and simulation of yarn in winding process

Modeling and characterization of the mechanical properties of nanofiber yarn

Characterization of tensile properties of chain stitch structure fabric with negative Poisson's ratio yarn

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Analysis of the influence of yarn angle on the mechanical behaviors of cured woven composites

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Mechanical properties of a novel tri-component high stiff auxetic reinforced composite structure

Computational Simulation of Complex Structure Fancy Yarns

Numerical study of the Impact of shear angle, yarn spacing and yarn fiber volume fraction on effective elastic properties of plan-woven composite