Abstract:Two‐scale homogenization model predicts mechanical properties and stress fields in intra‐yarn hybrid natural/synthetic woven composites. This paper investigates how combining natural and synthetic fibers within yarns, altering the degree of hybridisation, and varying weave architectures affect the homogenized elastic properties and stress distributions in 2D woven composite laminae using a two‐scale homogenization scheme. The novelty lies in integrating a micro‐scale representative volume element model with a meso‐scale repeating unit cell model to capture intra‐yarn natural/synthetic fiber hybridisation. The study focuses on 2/2 twill and 5‐harness satin woven laminae with flax/E‐glass, hemp/E‐glass and basalt/E‐glass hybrid yarns, all with a total fiber volume fraction of 0.6. Fiber distributions are created through a random sequential expansion algorithm for hybrid RVEs, while periodic meso‐structures are used to define weave architectures for RUCs. Results show that yarn‐level fiber hybridisation significantly influences matrix stress distributions, with variations of up to 22%. In contrast, weave architecture has a minimal effect, with variations in homogenized properties below 2%. Varying fiber types, degrees of hybridisation and weave architectures allow for the tailoring of yarn and lamina properties and altering the stress distributions at micro‐ and meso‐scales and potentially influencing damage mechanisms. The modeling approach for analyzing the mechanical behavior of intra‐yarn hybrid natural/synthetic woven laminae could potentially be used to tailor their tolerance to damage. Highlights Two‐scale homogenization integrates RVE and RUC for 2D woven hybrid composites. Analyzed flax/E‐glass, hemp/E‐glass, basalt/E‐glass in twill and satin weaves. Intra‐yarn hybridisation significantly affects properties and stress fields. Hybridizing fibers offers tailored properties and may improve damage tolerance.

Numerical study of the Impact of shear angle, yarn spacing and yarn fiber volume fraction on effective elastic properties of plan-woven composite

Effect of plant short fibers on the mechanical properties of carbon fiber reinforced epoxy matrix by using FEM based numerical homogenization technique

A two‐scale numerical analysis of intra‐yarn hybrid natural/synthetic woven composites

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

Analysis of the influence of yarn angle on the mechanical behaviors of cured woven composites

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Prediction of elastic properties of woven polymer composites using micromechanical models and measured microstructural parameters

Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters

A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations

Effects of Structural Parameters on Fiber Volume Fraction of 3D Woven Composites

A Simple Anisotropic Fiber Reinforced Hyperelastic Constitutive Model for Woven Composite Fabrics

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

The Effect of Structural and Process Parameters on the Effective Properties of Polymer Composites Reinforced by Fiber-rod and Three-dimensional Weaving

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

An Analytical Model for Predicting the Elastic Properties of Triaxially Braided Composites

An anisotropic hyperelastic constitutive model considering shear-tension coupling for 2-dimensional woven fabrics

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

An experimentally validated anisotropic visco-hyperelastic constitutive model for knitted fabric-reinforced elastomer composites

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites