Abstract:Abstract Auxetic metamaterials have unique structural designs exhibiting zero or negative Poisson’ ratios during stretch/compression processes, which enable many critical applications such as sensing technology, wearable devices, and weight reduction parts. However, it is difficult to achieve ideal performance of various structural designs through geometry manipulation due to the beam/wall buckling under large strain. One way to minimize the occurrence of buckling is by introducing the high elasticity on the joints, but trade-offs exist among different mechanical behaviors. To this end, this study proposes to use a multi-material combining with the structure optimization to design an auxetic structure. The basic re-entrant structure is employed due to its simplicity, and finite element method (FEM) is adopted to demonstrate the effectiveness of this newly proposed strategy regarding the auxetic behaviors. For this multi-material structure, a different Young’s modulus is designed to apply on the additional arch structure. A series of simulations, which consider the influence of the mechanical properties, are conducted to investigate the change of auxetic behaviors such as stress distribution, Poisson’s ratio, and equivalent Young’s modulus against the applied material properties. The results indicate that the mechanical properties are strongly affected by the geometry design and the applied materials properties. Meanwhile, the buckling effect of the beam/wall could be eliminated if the hinge strength is small enough. The trade-off between equivalent mechanical properties and Poisson’s ratio could also be tuned through this newly material-based design.

Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

A study of tubular braided structure with negative Poisson’s ratio behavior

Theoretical Modeling on the Deformation Behavior of Auxetic Tubular Braid Made from Modified Circular Braiding Technique

Finite element simulation of an auxetic plied yarn structure

Geometric Analysis of Three-Dimensional Woven Fabric with in-Plane Auxetic Behavior

The quasi-static responses and variable mechanical properties of a novel 3D composite auxetic tubular structure connected by the thin-walled tube

An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids

Mechanical properties of a novel tri-component high stiff auxetic reinforced composite structure

An Analytical Model for Predicting the Elastic Properties of Triaxially Braided Composites

In Situ X‐Ray Tomography of Sintered Metal Fiber Felts Exhibiting Auxetic Effect under Tension and Compression

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry

Size effects of elastic properties for auxetic cellular structures: a bending energy-based method

Tensile response of tubular braids with an elastic core

A Finite Element Simulation Study on the Properties of a Multi-Material Based Auxetic Metamaterial

Modelling Of The Structure-Property Relationships In Auxetic Nanotube

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

On the Design and Mechanical Properties of a Novel Tubular Auxetic Anti-Tri-Missing Rib Structure