Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

Mechanical properties of a novel tri-component high stiff auxetic reinforced composite structure

A novel three-component helical auxetic yarn with staple fibers prepared by ring spinning

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method

3D woven auxetic composites using onloom shaped reinforcement

Finite element simulation of an auxetic plied yarn structure

Effect of design parameters on auxetic behavior and stiffness of additively manufactured 316L stainless steel

Compressive and flexural responses of auxetic sandwich panels with modified re-entrant honeycomb cores

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

Multifunctional auxetic and honeycomb composites made of 3D woven carbon fibre preforms

Study on the mechanical properties of CFRP composite auxetic structures consist of corrugated sheets and tubes

Effect of structural parameters on formability of auxetic weft-knitted fabrics based on zigzag structure

Hybrid Auxetic Foam and Perforated Plate Composites for Human Body Support

Lattice structures with a negative Poisson's ratio: Energy absorption assessment

Mechanics of Auxetic Materials

Compressive behavior of triaxially braided metal-CFRP hybrid lattice structures

On the Design and Mechanical Properties of a Novel Tubular Auxetic Anti-Tri-Missing Rib Structure

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry

Compressive properties of a modified re-entrant chiral auxetic structure (MRCA) under uniaxial quasi-static loading