Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

3D woven auxetic composites using onloom shaped reinforcement

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Multifunctional auxetic and honeycomb composites made of 3D woven carbon fibre preforms

Geometric Analysis of Three-Dimensional Woven Fabric with in-Plane Auxetic Behavior

Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Effect of structural parameters on formability of auxetic weft-knitted fabrics based on zigzag structure

Multiaxis three-dimensional weaving for composites: A review

Energy absorption from composite reinforced with high performance auxetic textile structure

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

A comprehensive review on advancements, innovations and applications of 3D warp interlock fabrics and its composite materials

Mechanical properties of a novel tri-component high stiff auxetic reinforced composite structure

An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites

ABC‐Auxetics: An Implicit Design Approach for Negative Poisson's Ratio Materials

Quasi-static and dynamic behavior analysis of 3D CFRP woven laminated composite auxetic structures for load-bearing and energy absorption applications

Creating three-dimensional (3D) fiber networks with out-of-plane auxetic behavior over large deformations

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

4D printing of fiber-reinforced auxetic structures: the building blocks: A review

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method