Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

Energy absorption from composite reinforced with high performance auxetic textile structure

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Experimental study of energy absorption in 3D-textile reinforced polymer composites under high-velocity impact loading

Low-velocity impact performance of ultra-high molecular weight polyethylene/aramid-polyester core-spun yarn hybrid composites

3D woven auxetic composites using onloom shaped reinforcement

Optimizing an auxetic metamaterial structure for enhanced mechanical energy absorption: Design and performance evaluation under compressive and impact loading

Energy absorption characteristics of carbon fiber reinforced plastic/aluminum hybrid materials double arrow-head auxetic structure

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites

Quasi-static and dynamic behavior analysis of 3D CFRP woven laminated composite auxetic structures for load-bearing and energy absorption applications

Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry

Novel method of multiaxis weaving and impact analysis of the ensuing composites

Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters

The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates

Evaluation of the low-velocity impact response of high-performance multi-axial warp-knitted flexible composites

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications

Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations

Fatigue-Resistant and Hysteresis-Free Composite Fibers with a Heterogeneous Hierarchical Structure

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites