Abstract:Abstract3D woven composites, due to the presence of through-thickness fibre-bridging, have the potential to improve damage tolerance and at the same time to reduce the manufacturing costs. However, ability to withstand damage depends on weave topology as well as geometry of individual tows. There is an extensive literature on damage tolerance of 2D prepreg laminates but limited work is reported on the damage tolerance of 3D weaves. In view of the recent interest in 3D woven composites from aerospace as well as non-aerospace sectors, this paper aims to provide an understanding of the impact damage resistance as well as damage tolerance of 3D woven composites. Four different 3D woven architectures, orthogonal, angle interlocked, layer-to-layer and modified layer-to-layer structures, have been produced under identical weaving conditions. Two additional structures, Unidirectional (UD) cross-ply and 2D plain weave, have been developed for comparison with 3D weaves. All the four 3D woven laminates have similar order of magnitude of damage area and damage width, but significantly lower than UD and 2D woven laminates. Damage Resistance, calculated as impact energy per unit damage area, has been shown to be significantly higher for 3D woven laminates. Rate of change of CAI strength with impact energy appears to be similar for all four 3D woven laminates as well as UD laminate; 2D woven laminate has higher rate of degradation with respect to impact energy. Undamaged compression strength has been shown to be a function of average tow waviness angle. Additionally, 3D weaves exhibit a critical damage size; below this size there is no appreciable reduction in compression strength. 3D woven laminates have also exhibited a degree of plasticity during compression whereas UD laminates fail instantly. The experimental work reported in this paper forms a foundation for systematic development of computational models for 3D woven architectures for damage tolerance.

Novel method of multiaxis weaving and impact analysis of the ensuing composites

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites

Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

Evaluation of the low-velocity impact response of high-performance multi-axial warp-knitted flexible composites

Damage detection in bio-polyamide 11/woven basalt fibres composite laminates subjected to dynamic events

Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites

The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Investigations on the development of impact-resistant thermoplastic fibre hybrid composites from glass and steel fibre

Experimental Investigation on Low-Velocity Impact Performance of 3D Woven Textile Composites

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

Multiscale damage modelling of 3D woven composites under static and impact loads

Multiaxis three-dimensional weaving for composites: A review

Effect of triaxial woven fabric on bending properties of unidirectional composites

Incorporation of compaction effects in the automated generation of 3D woven composites representative volume elements by geometrical modelling

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Experimental and Numerical Analysis of Lightweight Hybrid Composites Under Low Velocity Impact