Abstract:Auxetics are a unique class of materials that exhibit a negative Poisson's ratio (NPR) owing to their distinguish deformation behavior. However, some auxetics are either weak in their in-plane directions and/or deform non-uniformly under quasi-static compression, resulting in inferior mechanical performance. This study aims to develop an auxetic metamaterial with relatively uniform deformation pattern and superior energy absorption capability. Inspired by the geometry of a butterfly, a novel auxetic metamaterial, namely, butterfly-shaped auxetic metamaterial ( BSAM), was developed. The in-plane compressive performances of the proposed metamaterial were experimentally and numerically investigated. Polyamide11 specimens were 3D printed using Multi Jet Fusion (MJF). NPRs were observed during the compression along both directions. The compressed BSAM revealed two distinctive plateau regimes in its nominal stress-strain curves. Influences of specific parameters on the mechanical performance and energy absorption of the BSAM were numerically examined. Moreover, when BSAM was compressed along the Y direction, the specific energy absorption outperformed that of BSAM compressed along the X direction. A comparative study was carried out using the validated numerical models between the proposed metamaterial (BSAM) and two other popular auxetic honeycombs: re-entrant and anti-tetrachiral. Young's moduli and plateau stresses of the BSAM were significantly surpasses those of the two honeycombs. Moreover, the specific energy absorption per unit mass (SEA) were 2.4 and 3.2 times that of re-entrant honeycomb when they were compressed along the X and Y directions, respectively. Meanwhile, the SEA of the BSAM in the X and Y directions were 2.1 and 2.7 times that of the anti-tetrachiral honeycomb. The exquisite geometric configurations of the BSAM revealed distinguished and controllable mechanical properties which could sheds light on the possibility to design bio-inspired metamaterial with multi plateau regimes and energy absorption capacities for specific applications.

Compressive properties of a modified re-entrant chiral auxetic structure (MRCA) under uniaxial quasi-static loading

Compressive mechanical behavior of additively manufactured 3D auxetic metamaterials with enhanced strength

Theoretical, Numerical, and Experimental Study on Quasi-static Compressive Behaviors of Elliptical Anti-chiral Auxetic Structure

In-plane compression behavior of meta-tetrachiral and common auxetic structures

Compressive and flexural responses of auxetic sandwich panels with modified re-entrant honeycomb cores

The out-of-plane compressive behavior of auxetic chiral lattice with circular nodes

Design Study for Multifunctional 3D Re‐entrant Auxetics

Microstructure and compression performance of novel AlSi10Mg composite auxetic structures fabricated by additive manufacturing

Study of Mechanical Properties of a New 3D Re‐Entrant Lattice Auxetic Structure under Bending

Coupling Chiral Cuboids with Wholly Auxetic Response

A bio-inspired auxetic metamaterial with two plateau regimes: Compressive properties and energy absorption

Study on the mechanical properties of CFRP composite auxetic structures consist of corrugated sheets and tubes

Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study

The compressive responses and failure behaviors of composite graded auxetic re-entrant honeycomb structure

3D auxetic mechanical metamaterials: an analytical, numerical, and experimental study

Quasi-static compression and dynamic crushing behaviors of novel hybrid re-entrant auxetic metamaterials with enhanced energy-absorption

Nonlinearity of Enhanced Cell Structures Having Auxetic Material Properties

Compressive properties and failure mechanisms of 3D-printed continuous carbon fiber-reinforced auxetic structures

Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Compression performance of 3D-printed thermoplastic auxetic structures