Abstract:International Journal of Protective Structures, Ahead of Print. Lightweight protective armour solutions have potential applications ranging from infrastructure cladding and damage tolerant aerospace composites to sports helmets and body armour. Elastomeric cellular structures are a promising candidate solution and with advances in 3D-printing technology, ever more complex geometries can be explored in the pursuit of enhanced performance. Auxetic structures, which exhibit negative Poisson's ratio behaviour and reported improved mechanical properties are of interest. Recently, 3D-auxetic structures have demonstrated the potential to outperform their 2D counterparts. This work investigates the performance of four candidate elastomeric cellular structures, 3D-printed in thermoplastic polyurethane (TPU): one non-auxetic, two 2D-auxetic and one 3D-auxetic. The structures are subjected to quasi-static compression, cyclic compression and low-velocity impact tests. Energy absorption diagrams, based on quasi-static compression data, are produced which demonstrate that the choice of most efficient energy absorbing structure depends on the specific energy of the threat. It is found that the 3D-auxetic re-entrant honeycomb structure outperforms all others for specific energies greater than 13.3 mJ/cm3. Cyclic compression tests demonstrate excellent recoverability, and thus reusability of all structures. Hysteresis is observed for all specimens, increasing with increasing maximum strain. Generally, the 3D-auxetic structure provides the greatest energy dissipation. The behaviour observed in the low-velocity impact tests appear consistent with the trends identified in the quasi-static tests. The 3D-auxetic structure is the best choice for absorbing high impact energies since it results in a lower stress being transferred when subject to an impact energy which causes densification. This work demonstrates the potential for 3D-auxetic elastomeric cellular structures to provide superior protective performance.

Nonlinearity of Enhanced Cell Structures Having Auxetic Material Properties

Hybrid Auxetic Foam and Perforated Plate Composites for Human Body Support

Large Stiffness Thermoformed Open Cell Foams with Auxeticity

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

Exploiting nonlinearities through geometric engineering to enhance the auxetic behaviour in re-entrant honeycomb metamaterials

3D-auxetic elastomeric cellular structures for impact protection

Metallic Metamaterials with Auxetic Properties: Re-Entrant Structures

A Nonlinear Repeated Impact Model of Auxetic Honeycomb Structures Considering Geometric Nonlinearity and Tensile/compressive Deformation

A Finite Element Simulation Study on the Properties of a Multi-Material Based Auxetic Metamaterial

Auxetic Structures for Tissue Engineering Scaffolds and Biomedical Devices

Bio‐inspired Integrated Auxetic Elastomers Constructed by Dual Dynamic Interfacial Healing Strategy

Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications

Effect of design parameters on auxetic behavior and stiffness of additively manufactured 316L stainless steel

Anisotropic Mechanics of Cell-Elongated Structures: Finite Element Study Based on a 3D Cellular Model

Low‐velocity impact response of 3D carbon fiber reinforced polymer auxetic lattice structures

A Novel Auxetic 3D Lattice Structure for Enhancing Energy Absorption

Energy Absorption and Stiffness of Thin and Thick-Walled Closed-Cell 3D-Printed Structures Fabricated from a Hyperelastic Soft Polymer

Compressive properties of a modified re-entrant chiral auxetic structure (MRCA) under uniaxial quasi-static loading

Compressive and flexural responses of auxetic sandwich panels with modified re-entrant honeycomb cores

Study of Mechanical Properties of a New 3D Re‐Entrant Lattice Auxetic Structure under Bending