Abstract:Closed‐cell Nylon foams are converted into auxetic metamaterials with densities between 68 and 138 kg m−3. The samples are produced via different vacuum times, temperature, and mechanical pressure. The best foam has a tensile Poisson ratio of −0.86 and a compression Poisson ratio of −0.16. These foams have potential applications in sports and military protective gears, as well as energy dissipation systems. This research presents a method to convert a conventional Nylon closed cell foam, with a density of 48 kg m−3, into auxetic metamaterials with densities ranging between 68 and 138 kg m−3. The samples are produced by applying vacuum and mechanical compression techniques. The study reports on the effect of processing parameters such as vacuum time, temperature, and mechanical pressure. Under optimized conditions, the resulting auxetic foams exhibit a tensile Poisson's ratio as low as −0.86, while the minimum compressive Poisson's ratio for the same sample reached −0.16. Based on morphological analyses via scanning electron microscopy (SEM), structural changes induced by the treatment are determined to relate with tensile and compressive properties, including modulus and strength, as well as the analysis of the stress level for different strains. The characterizations also include differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) for the Nylon foam before and after conversion. These findings underscore the potential applications of these auxetic foams in sports and military protective gears, as well as energy dissipation systems.

Large Stiffness Thermoformed Open Cell Foams with Auxeticity

Topological Characteristics and Mechanical Properties of Uniaxially Thermoformed Auxetic Foam

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Highly Sensitive Large Strain Cellulose/multiwalled Carbon Nanotubes (mwcnts)/thermoplastic Polyurethane (TPU) Nanocomposite Foams: from Design to Performance Evaluation

Emulsion Lyophilization as a Facile Pathway to Fabricate Stretchable Polymer Foams Enabling Multi-shape Memory Effect and a Clip Application.

Unlocking Auxetic Behavior in Recyclable Thermosetting Foams Enabled by Dynamic Disulfide Cross-linking Strategy

Hybrid Auxetic Foam and Perforated Plate Composites for Human Body Support

Shear Stiffness and Energy Absorption of Auxetic Open Cell Foams as Sandwich Cores

A facile method to fabricate auxetic polymer foams

The shear performance of uniaxially thermoformed auxetic polymer foams

Fabrication and characterization of auxetic shape memory composite foams

Auxetic Polymer Foams: Production, Modeling and Applications

Auxetic Closed Cell Nylon Foams Produced by Vacuum and Mechanical Compression (VMC)

One-pot preparing EVA elastomer auxetic foam through stress relaxation of molecular chains by heat annealing

Fabrication and Characterization of Shape Memory Auxetic Metamaterial

Introducing Auxetic Behavior to Syntactic Foams

Mechanical properties of foam-filled hexagonal and re-entrant honeycombs under uniaxial compression

A Soft Syntactic Foam Actuator with High Recovery Stress, Actuation Strain, and Energy Output

High-Strength and Shape-Memory Epoxy Cellular Material with Wood-Like Architecture

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams

A new modelling method for open cell foam structure based on centroidal and capacity constraint power diagram