In Situ X‐Ray Tomography of Sintered Metal Fiber Felts Exhibiting Auxetic Effect under Tension and Compression

Jun Ma,Shengchuan Wu,Jianzhong Wang,Huiping Tang,Feng Jin

DOI: https://doi.org/10.1002/adem.202200168

IF: 3.6

2022-04-26

Advanced Engineering Materials

Abstract:Sintered metal fiber felts (SMFFs) are a kind of the strongest auxetic materials to date, but there are significant differences in the reported auxeticities, due to the lack of investigation on the fabrication process. This study was performed to analyze the influence of fabrication process and structural features on the auxetic effect exhibited by sintered metal fiber felts. The sequence of compression and sintering processes determined the volume density of the inter‐fiber sintered joints and the resulting Poisson's ratio behavior under tension and compression. The SMFFs with a low volume density exhibited a strong auxetic effect under tension and achieved a positive Poisson's ratio under compression because of the weak inter‐fiber layer bonding. In contrast, the felts with a high density of inter‐fiber joints revealed a relatively weak auxetic effect under both tension and compression. Moreover, an increase in the thickness and a decrease in the porosity reduced the auxetic effect. In addition, in situ X‐ray tomography of the tensile testing was performed to elucidate the mechanism of the auxetic effect. To explain the observed Poisson's ratio behavior under tension and compression, periodical finite element modeling with real meso‐structures was performed. This study gives a new insight into the relationship between the structure features and the Poisson's ratio behaviors.This article is protected by copyright. All rights reserved.

materials science, multidisciplinary