Abstract:In our previous research, a tri-component elastic-conductive composite yarn (t-ECCY) with sophisticated structure was fabricated in one twisting process on a modified ring spinning frame, which employed the elastane filament as a core and the stainless steel filament combined with rayon fibers as a helical winding around the extensible core. Herein, structural assessment in initial and straighten states, a predictive model for the tensile behavior of t-ECCY during stretch, and the micro-morphologies of fractured yarn surfaces under varying strain rates were investigated. The deformation mechanism of coils in t-ECCY is the initial separation of adjacent coil surfaces and gradual unwinding until it is free of coils. The straight-limit level of t-ECCY is mainly dependent upon the geometric disposition of its constituents inside and the elastane draft ratio. No obvious changes were found under cyclic stretch, indicating its compact structure and super elasticity. The essentially nonlinear tensile behavior of t-ECCY was emphasized based on the typical characteristic S-curve and cord method. A modified Vangheluwe–Hook tensile constitutive model by introducing an exponent to the exponential function was proposed to fit experimental curves under varying strain rates, and the ideal analytical equations were obtained by using the genetic algorithm with 1stOpt simulation software for the nonlinear regression with iteration procedures. It was demonstrated that the proposed analytical model can fairly well replicate the stress characteristics of yarn under different strain rates qualitatively and quantitatively. In addition, a sharp break dominates at lower strain rates, whereas a local pull-out break is found at higher strain rates.

Mathematical modeling and numerical simulation of nonlinearly elastic yarn in ring spinning

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Finite element modeling and simulation of yarn in winding process

Simulation and experimental study on transverse nonlinear vibration of axially moving yarn

Mathematical modeling of dynamic yarn input tension on circular weft knitting machine with positive storage feeding

Mathematical Model for Yarn Unwinding Part Ι: Cylindrical Packages

Elasto-viscoplastic model for rayon yarns

Structural evolution and predictive modeling for nonlinear tensile behavior of tri-component elastic-conductive composite yarn during stretch

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Modeling and characterization of the mechanical properties of nanofiber yarn

Viscoelastic tensile model of core/wrapped composite yarn with double filament

A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations

A New Monte Carlo Model for Predicting the Mechanical Properties of Fiber Yarns

Numerical simulation on velocities of two interacting fibers in fiber suspension

Unravelling the Mechanics of Knitted Fabrics Through Hierarchical Geometric Representation

A Quasi-Dynamic Model for High-Speed Ball Spinning

Yarn/Yarn Friction Analysis Considering the Weaving Process of Textile Fabrics: Analytical Model and Experimental Validation

Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Non-Axisymmetric Overbraiding Process Modeling Based on Enhanced Kinematic Models

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Numerical Study of Melt-Spinning Dynamic Parameters and Microstructure Development with Ongoing Crystallization