Abstract:Force analysis of weaving yarns. Stress‐ strain curves and fractures sections of composites with different fabric structures under tensile load. Stress‐ strain curves and fracture mechanism of composites subjected to bending loads. The component yarns and fabrics effected the formability and stability of preforms, and finally determined the performance of corresponding composites. In this research, four typical fabric structures of carbon fiber resin composites (CFRC) were introduced to conduct the comparative investigation. The stability of component yarns in natural state and in fabrics have been discussed at mesoscopic scale, and the main methods to improve the structural stability of preforms were proposed. Composites with and without stable‐structural fibers and fabrics were manufactured by the modified curing process, and the yarn cross‐sections in specimens were analyzed. The tensile and bending performance of these composite specimens was comparatively conducted to discuss the influence of stable preforms on the elastic properties. The fracture mode and mechanism of specimens were illustrated in meso‐scale. The results depicted that yarns and fabrics with stable‐structural cross‐section could ensure a high fiber volume fraction, reducing the curvature of load‐bearing yarns, and effectively reduce the yarn curvature along bearing direction. The high interfacial bonding strength of composites with stable geometrical fabrics exhibited the excellent in‐plane mechanical properties, and presented the obvious brittle fracture characteristics when the fibers fully exert their load‐bearing capacity. Highlights Stable‐structural fibers result in the prominent performance of composites. Performance of composites with stable preforms show the low dispersion. Stable cross‐section of component yarns can enhance the stability of preforms. Low curvature yarns lead to brittle fracture characteristics of composites.

Yarn/Yarn Friction Analysis Considering the Weaving Process of Textile Fabrics: Analytical Model and Experimental Validation

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

A mesoscopic model for inter-yarn friction

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Finite element modeling and simulation of yarn in winding process

Study on the wear characteristics of carbon fiber yarns under the influence of multifactor coupling on braiding carriers

Effect of processing parameters on friction and damage of carbon yarn during three-dimensional weaving

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

A New Monte Carlo Model for Predicting the Mechanical Properties of Fiber Yarns

Experimental simulation of friction and wear between carbon fiber tow and heddle eye under periodic tension during the 3D weaving process

Analysis of the influence of yarn angle on the mechanical behaviors of cured woven composites

Analysis of Thermomechanical Behavior of the Tubular Braided Fabrics with Flax/Polyamide Commingled Yarns

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Thermo-mechanical Modeling of Woven Fabric Reinforced Shape Memory Polymer Composites

Experimental characterization and numerical analysis of 3D woven preforms torsional deformation

A Computationally Efficient Model to Predict the Uniaxial Tensile Loading Response for Dry Woven Fabrics

Role of stable‐structural yarns and fabrics on the tensile and bending performance of carbon fiber resin composites

Modeling and characterization of the mechanical properties of nanofiber yarn

An experimentally validated anisotropic visco-hyperelastic constitutive model for knitted fabric-reinforced elastomer composites

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach