Abstract:Ferritic stainless steels are candidate interconnect materials for solid oxide fuel cells (SOFC); however, the oxidation resistance of commercial stainless steels within the operating temperature range of 700–800°C is not adequate. A relatively thick, poorly conducting oxide layer forms on the surface of the stainless steel interconnect, decreasing cell performance. One way of modifying the oxidation behaviour of an alloy is through surface treatment. The aim of this work is to perform a systematic study of the effect of surface treatment (sandblasting and cold rolling) on the oxidation behaviour of three different ferritic stainless steels at 800°C in air. Oxidized specimens are characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). In addition, specimens oxidized under the same conditions for 15min are examined using secondary ion mass spectrometry (SIMS) depth profiling and X-ray photoelectron spectroscopy (XPS) depth profiling.For all three steels, the as-is (undeformed) specimens have a lower mass gain than the deformed specimens. The steel with the highest Cr content has significantly higher mass gains than the other two steels, which have similar mass gains. X-ray diffraction and electron microscopy results indicate that the oxide scale formed on all the specimens consists of an inner layer of chromia and an outer spinel layer. The relative amounts of the two oxide phases present depends on both the steel and treatment condition. The presence of insulating oxides at the metal/oxide interface is detected with both surface science techniques and electron microscopy.

CHAPTER 6 Development of SOFC Interconnect Stainless Steels

Progress of Interconnect Materials Used for SOFC

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

A tutorial review on solid oxide fuel cells: fundamentals, materials, and applications

Perspectives on the metallic interconnects for solid oxide fuel cells

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

SOFC ' s Interconnects Materials Development

Solid Oxide Fuel Cells: Past, Present and Future

The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Recent advances on electrolyte materials for SOFC: A review

Lifetime Issues for Solid Oxide Fuel Cell Interconnects

Research Progresses in the Preparation of Spinel Coatings on the Surface of SOFC Ferrite Stainless Steel Interconnectors

Progress in SOFC Metallic Interconnect Coating

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

Review on the Development of Solid Oxide Fuel Cells

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Initial stage oxidation corrosion of commercial ferritic stainless steels with different Cr contents at 650 °C for solid oxide fuel cells

A review on the solid oxide fuel cells (SOFCs) interconnect coating quality on electrophoretic deposition (EPD) processing parameters